Repareer je spullen Gemeenschap Winkel

Model A1139 / 1680x1050 screen resolution

33 Vragen Bekijk alle

Opties

Boots up but black screen

My 17" 2007 MacBook had the screen go black while I was working.

I rebooted holding down control alt shift I believe that was it and it came back on.

Now it's done it again. Power button turns it on front light comes on and slight screen glow near bottom.

Gives a single long shrill tone then the standard chime when power button is depressed. I can feel hard drive spinning seems to stop at usual amount of reboot time. But screen still dark.

Any help is greatly appreciated

Thanks! Ron

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
1 Opmerking

Just to be clear here you have a PowerBook or a MacBook Pro? These are very different systems. Your model info in your question and what you selected are not the same.

door

Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

A single tone indicates there is no RAM installed:

https://support.apple.com/en-us/HT202768

Was dit antwoord nuttig?

Ja Nee
Score 3

2 opmerkingen:

Yes exactly. this means that one or both of your ram modules are busted.

Sorry bro :(

door

But it also could be the wrong RAM. Without being sure what the system is the Beep code is not enough to isolate if the slot is the problem. Most likely, it is.

door

Voeg een opmerking toe

Opties

Looks like a problem with your RAM (I had similar one).

Try removing the RAM modules one by one from their slots and booting it again

Was dit antwoord nuttig?

Ja Nee
Score 2
Voeg een opmerking toe

Voeg je antwoord toe

Ron zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 8

Altijd: 776