Having an issue after i install 2 different SSDs on one of my mid 2011 iMac using the 2nd ssd kit (sata cable and special power cable from the motherboard). Disk not Ejected Properly I'm trying to figure it out no luck yet!
Is dit een goede vraag?
Rep: 496,7k
35
339
974
You'll need a fixed SATA II (3.0 Gb/s) HD or SSD for your system. If you review the Red note at the bottom of this: OWC Data Doubler. A SATA III (6.0 Gb/s) HD or SSD won't work in this system reliably. The systems SATA port has a known compatibility issue. You also can't use an auto SATA port sensing drive (one that can run in either SATA II or SATA III system) it must be a fixed SATA II drive.
Was dit antwoord nuttig?
Rep: 689,3k
3,8k
1,1k
2,6k
The BUS on the optical drive port is not fast enough to handle it. Try putting a standard HD in that position.
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 0
Altijd: 136
1 Opmerking
Your systems specs: MacBook Pro 17" 2.3 GHz i7 (Early 2011)
door DanJ