Ga door naar hoofdinhoud

Apple's 2012 first-generation 7.9-inch iPad mini, with 16, 32, or 64 GB of storage and an A5 processor.

630 Vragen Bekijk alle

Replaced Screen after working initially the screen went black

Replaced Screen in IPad Mini everything was working fine. The battery was at 4% so I put it on charge and about 10 minutes later I checked it and it will not power on.

Any suggestions?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Het nuttigste antwoord

Hi Travis I take it you left it on charge for a while you can redo again to see check connections possible a faulty screen turn it on with the screen still loose in case its impeded when housed,remove battery(if possible) and try again no real way of checking as they are the devil to test unless you had same model again to swap it was old screen working at all will it still work back in again..sorry its a case of elimination which is a pain..

Was dit antwoord nuttig?

Score 1

1 Opmerking:

I opened the I pad again. And disconnected the cables, reconnected the cables, then reinstall everything. And it powered on. Thanks for your input.

door

Voeg een opmerking toe

Voeg je antwoord toe

Travis Todd zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 45