Rep: 23
1
1
I just completed a repair of my mom's iPad 4 - The display was cracked so I replaced the digitizer and plastic ring around the outside. Part of the black dust strip was ripped so I peeled some of of it off on the lcd screen itself. Once assembled the display is dimmer down almost half the screen exactly. Is this because the black fabric / foam dust strip is removed or what else might it be?
Is dit een goede vraag?
Rep: 3,6k
10
10
3
Hey @jeremy, you'll probably have to replace the LCD connector or the board of the iPad. One of the backlight filters probably became shorted out after the replacement. Here's one tutorial you can follow for fixing the issue.
-Let me know how it goes
Was dit antwoord nuttig?
Thanks for the feedback - I'll look into this.
Cool keep me updated.
Fixed - I disassembled the ipad again - disconnected the LCD cables - cleaned them and reseated them. That restored the backlight. Thanks for pointing me in the right direction. Glad it wasn't more serious as noted in the video.
Awesome! I'm glad I could help :)
You would be surprised how dust inside the display connector can cause this sort of problem. I had to clean up the connector with a fine brush to get the dust out.
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 3
Afgelopen 30 dagen: 12
Altijd: 4,551
