Ga door naar hoofdinhoud

De huidige lijn van iPod Nanos bestaat uit 7 verschillende generaties.

1004 Vragen Bekijk alle

Stuck in OK to disconnect mode, can't turn on?

I have an IPOD nano and the screen says OK to disconnect with a check mark. When I disconnect it, it seems frozen in this mode and I can't turn it on,off, nothing.

Any answers?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 11
2 opmerkingen

I have an IPOD nano and the screen says OK to disconnect with a check mark. When I disconnect it, it seems frozen in this mode and I can't turn it on,off, nothing.

door

Voeg een opmerking toe

7 Antwoorden

Gekozen oplossing

hold down the power and vol down buttons till apple sign appears. Worked for my 6th gen with same issue.

Was dit antwoord nuttig?

Score 21

14 opmerkingen:

Bee Jay, you got it buddy. I did that and my ipod is back , Thanks

door

thanks , it helped

door

how smart can one be??? not curing cancer however making sweet music!!

door

i did that but still doing the samething

door

It worked! Thanks!

door

9 commentaren meer tonen

Voeg een opmerking toe

Do a reset. I'm not sure which nano you have, but typically a reset involves sliding the hold switch to hold then back again then pressing the center and menu button simultaneously for 6 to 10 seconds. You may need to repeat this a time or two. Also make sure to be touching only the center and menu buttons, not any other part of the control wheel and push the menu button from only the outer portion of the control wheel, not toward the center. Check out this link to the apple support page where you can select your nano, though the process should be the same:

ZELDA

Was dit antwoord nuttig?

Score 15

9 opmerkingen:

thank you very much... malama pono ... Aloha 'oi From the Islands of HAWAII

door

I was at my wits end trying to solve this major issue. Thanks to your clever advise all is back to normal within minutes. THANK YOU!!!!

door

R Trent.....THANK YOU!! IT WORKED!!

door

It worked Thanks!!

door

tnx it worked

door

4 commentaren meer tonen

Voeg een opmerking toe

Press home and power button

Was dit antwoord nuttig?

Score 5

6 opmerkingen:

thank you!!

:) :) :) :) :)

door

Does not work for my I pod 160

door

should you keep the i pod in the hold position

door

thank you it worked

door

It worked but it said I have to connect to Itunes to restore.

door

1 commentaar meer tonen

Voeg een opmerking toe

I tried the power & reset button option, the apple logo is visible, after which it goes back to "ok to disconnect" . The local repairer says that it is a hard drive issue. Mine is an iPod black

Was dit antwoord nuttig?

Score 1

1 Opmerking:

I connected this to iTunes, but the iPod is not being detected to try a reset. I can hear the hard drive spinning all the while. Any help to resolve this will be much appreciated

door

Voeg een opmerking toe

Plug your ipod into itunes.

Click on ipod.

Click Restore.

Wait Patiently

Click Sync

All Done!

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Step 1.- connect ur ipad nano to pc or laptop

Step 2.- install itune software to ur pc

Step 3.- select ur device (file ---> add device

Step 4.- click restore

Step 5.- follow the instructions

Step 6 .- solved ur problem.

100% its wrkd.. by FB: bala sam Chennai...

Was dit antwoord nuttig?

Score 0

1 Opmerking:

Can someone help with my I pod problem, there's a tick in the middle of the screen, reading ok to disconnect, just can't get it off that

door

Voeg een opmerking toe

i have an ipod quite old and it has a message with tick saying ok to disconnect and it won’t charge i have read others with the same problem but it won’t work please help

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Sandy zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 27

Afgelopen 30 dagen: 112

Altijd: 75,510