Ga door naar hoofdinhoud

Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

548 Vragen Bekijk alle

imac not starting up even in safe boot mode...the apple hardware test

results were error code

1st pass 4MOT/1/40000003:HDD1404

2nd pass 4MOT/1/40000003:HDD1409

Please help.We purchased the computer in Singapore and it was working fine until after we shipped it over to Toronto where we are now.Appreciate any help.

Thank you so much.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score -1
Voeg een opmerking toe

4 Antwoorden

Gekozen oplossing

I know it's old but others may find it useful.

I believe the error relates to the HDD fan not spinning up to the required speed

Was dit antwoord nuttig?

Score 0

1 Opmerking:

why?

door

Voeg een opmerking toe
Het nuttigste antwoord

I concur - those AHT codes refer to the Hard Drive/Hard Drive controller. It could be as simple as the connector working loose in transit.

If you are near an Apple Store or AASP, take it in and have them run Apple Service Diagnostics - it is more comprehensive and should help pinpoint the failed subsystem. (ASD is not available to the public.)

Was dit antwoord nuttig?

Score 1

2 opmerkingen:

correction: not available "legally" to the public.

door

For Canada you can find a store via this link that may also repair: http://www.apple.com/ca/buy/locator/

door

Voeg een opmerking toe

Looks like you need a new hard drive get one here. If you need to recover data I suggest Data Rescue 3, it actually works, I've used it to recover data myself.

Was dit antwoord nuttig?

Score 0

2 opmerkingen:

Careful with data recovery software on a failing drive. It can make the problem of getting the data more difficult and costly if it doesn't work. These programs put the drive through vigorous use. Like taking your grandma for a marathon run...

door

Not really actually, it's not that expensive and you usually only need to run it once. Obviously it's not gonna be good if you do it 30 times, but you only need to do it once or twice. That is why trying to clone the drive first is good.

door

Voeg een opmerking toe

'cause that's what the service manual tells me... there is no reference to the following number but I believe it is the actual speed detected at time of error.

Block Image

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

obstructivism zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 2,868