Repareer je spullen Gemeenschap Winkel

A budget companion phone for the Galaxy SIII, Also known as Samsung I8190 Galaxy S3 mini, Samsung Galaxy S III more. Available as Samsung I8190N Galaxy S III mini with NFC. Identifiable by the model number GT-i8190.

44 Vragen Bekijk alle
Vraag afgerond

Opties

Soldering a new USB port

Hi!

My mom her Galaxy S3 (i8190) mini usb port broke (the little thing inside, just broke in half).

Now, I've did some soldering before but only with much larger objects.

Since this is very tiny, are there any things I should pay extra attention to?

Plus, since I don't have a desoldering station or equipment; What is the most easy way to remove the old one?

Very much thanks in advance!

PS. I apologize for my bad english..

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

If u use hot air soldering station be carefful with microphone, put some tape onit to protect it.

U need to be carefull with pads, not to make short. Otherwise yout phone will not only be no charging but it wont work.

To replace USB connector properly u need microspoce, hot ait station and this soldering iron. Use flux!

To replace USB connect with only soldering iron put a lot of soldering on it and use max heat, then with tweezers remove usb connector, clean wholes and solder new one!

Was dit antwoord nuttig?

Ja Nee
Score 1

1 Opmerking:

Thanks a lot man! :)

door

Voeg een opmerking toe
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 265