Ga door naar hoofdinhoud

Looking For Pinouts for Sata Cable 820-2289-a

Hey guys! I've been looking everywhere for the wire configuration for of my old A1181 MacBook 13' laptop. I've included a few pics to make it a bit easier to know what i'm talking about.

I was just wondering If I could possibly make a Sata to USB connection myself. I have a data processor to run ith through in between now i just have to figure out if I can either use this one or look for something else. I found the computers schematics but it doesnt say much in terms of what the "k36 sata transfer board rev:a" does. anyone happen to know? any advice anyone?

Block Image

Block Image

Block Image

Block Image

Block Image

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 2
1 Opmerking

i have 4 yellow/gold wires and 2 blue wires and 3 red wires from a sata transfer board k36 i want to put a usb on it where do each wire goes on usb grnddata+ data- ,,POWER

door

Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

SATA signaling is not directly compatible to USB ports. You need some conversion logic with your part is missing.

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe

Voeg je antwoord toe

Manny O zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 184