NVMe PCIe 3.0 SSDs fit & work in late '15 iMacs?

Question

iMac Intel 27"

Reparatiehandleidingen en ondersteuning voor 27-inch Intel iMacs van Apple, geïntroduceerd in oktober 2009.

3405 Vragen Bekijk alle

BB @zice

Rep: 13

1

Gepost: 12 jan. 2016

Opties

NVMe PCIe 3.0 SSDs fit & work in late '15 iMacs?

Can a 3rd party SSD such as Samsung 950Pro (NVMe, PCIe 3.0x, 4 lanes) work in a late 2015 retina iMac?

The iMac board only has PCIe 2.0 w/4 lanes, basically limiting the SSD speed to "only" 500MB/s per channel (vs 1GBps in PCIe 3.0 standard).

The questions are:

- does the controller/connectivity of the new NVMe SSDs allow for simple PnP on the iMac board?

- does the PCIe 2.0 vs 3.0 hinder/limit performance, regardless of available lane count? (both 4x)

Thanks!

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee

Score 1

1 Opmerking

Looking at doing the same thing... (with a 512). Did you end up trying this upgrade, BB?

28 nov. 2016 door Squick

Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Dan @danj

Rep: 479,4k

Self employed contract worker

35

329

971

Gepost: 29 nov. 2016

Opties

Sorry guys ;-{

Apple uses a custom physical interface with their PCIe blade SSD units in the newer 'Thin Series' iMac's. The Samsung 950 Pro blade SSD conforms to the M.2 standard and will not fit.

You could swap out your current HD or add in a SSD using the SATA port the system. But to be honest I think you'll get better performance using an external Thunderbolt RAID'ed SSD drive. Which would be faster than the internal SATA port connected SSD. Besides it is less work and risk of damaging things.

Was dit antwoord nuttig?

Ja Nee

Score 2

2 opmerkingen:

Can you suggest a Thunderbolt to NVME adapter/box?

or USB 3.1 Gen2 (10Gbps) to NVME.

27 mei 2017 door tianling zhou

So far I've only seen USB to M.2 SATAe cases. I don't think you'll see any M.2 NVMe external cases.

Unlike SATA which is a full interface (Phy & dialog) PCIe is not (Phy only). M.2 is a strange beast! Which makes it more complex to implement within an external dumb case. It will require some level of Phy bus driver & micro controller to emulate a PC's PCIe bus. Which could slow the I/O if it's not powerful enough and it would be costly. Look at what a Thunderbolt RAID drive case costs.

27 mei 2017 door Dan

Voeg een opmerking toe

Looking at doing the same thing... (with a 512). Did you end up trying this upgrade, BB? — Squick
Can you suggest a Thunderbolt to NVME adapter/box?

or USB 3.1 Gen2 (10Gbps) to NVME. — tianling zhou
So far I've only seen USB to M.2 SATAe cases. I don't think you'll see any M.2 NVMe external cases.

Unlike SATA which is a full interface (Phy & dialog) PCIe is not (Phy only). M.2 is a strange beast! Which makes it more complex to implement within an external dumb case. It will require some level of Phy bus driver & micro controller to emulate a PC's PCIe bus. Which could slow the I/O if it's not powerful enough and it would be costly. Look at what a Thunderbolt RAID drive case costs. — Dan

iMac Intel 27"

NVMe PCIe 3.0 SSDs fit & work in late '15 iMacs?

1 Antwoord

Voeg je antwoord toe