Ga door naar hoofdinhoud

GSM version of the fourth generation of iPad released November 2, 2012. Model Number A1459 / 16, 32, or 64 GB

43 Vragen Bekijk alle

iPad 4 after Digitizer replacement some areas don´t react

Hello guys,

i replaced my iPad 4 front panel after it was broken but now i have the problem that the new digitizer only reacts at the top and bottom area, in the middle of the screen it doesn't response. I thought the Digitizer is damaged so i took a new one but same problem only in different areas.

What can it be? Is it again maybe a damaged digitizer or maybe a short circuit some where or something else?

Really appreciate if you can help me out.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Most likely the digitizers your using are from third party vendors, and you're having third party problems. I would try a quality digitizer. It is possible that you've damaged the alligator connector, while assembling it

iPad 4 Screen Digitizer Assembly

iPad 4 Screen Digitizer Assembly Afbeelding

Product

iPad 4 Screen Digitizer Assembly

$39.99

Was dit antwoord nuttig?

Score 1

1 Opmerking:

Thank you for your help. I will try a new one.

door

Voeg een opmerking toe

Voeg je antwoord toe

fuad1177 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 99