Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3252 Vragen Bekijk alle

Why wont my screen show any display?

When I connect my phone to the computer it is recognized and makes the charging noise.When I hold down the home button the voice control comes on.The only problem is that when I try to turn on the phone the screen lights up but its a black screen with a blue tint .So I know the phone works but nothing displays just a black/blue screen and I know its on because theres a crack near the top because when i press the power button a white light shows up then turns off when i click the power button again.Please someone help

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Een opmerking toevoegen
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12

3 Antwoorden

Gekozen oplossing

Yeah, you've broken your display assembly. It's fixable, if you want to do it yourself, just takes some time

iPhone 4 CDMA Repair

iPhone 4 (CDMA/Verizon) LCD Screen and Digitizer

That's for phones on sprint or Verizon. There's a different part for GSM phones, such as at&t or T-Mobile

iPhone 4 (CDMA/Verizon) LCD Screen and Digitizer afbeelding

Product

iPhone 4 (CDMA/Verizon) LCD Screen and Digitizer

$39,99

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen
Het nuttigste antwoord

It sounds like the LCD on the device has gone out

Was dit antwoord nuttig?

Score 1

Commentaar:

Am i able to repair this on my own because once when the lcd was disconnected after dropping my phone i opened the back and presssed back into place

door

I would disconnect the ribbon cable and insert it back in if it's still doing the same thing then unfortunately the LCD gave out and needs to be replaced with a new digitizer.

door

and DO NOT press on the back of the shield once you open the battery cover, by doing that you could damage the ribbon cable or circuit chips that are underneath. Find a small screwdriver and take the shield off and disconnect the ribbon cable and pop it back in, it may not be seated correctly.

door

Also when assembling back together put the screws exactly back were they came from, there are different sizes of screws and you don't want to put a screw at a place where it doesn't belong which could cause damage.

door

You can check the inside to make sure its just not a loose cable. The repair is something you can do yourself! iFixit has the part and guide!

door

Een opmerking toevoegen

How long has that been doing this?

Was dit antwoord nuttig?

Score 1

Commentaar:

It has only been doing this for a day

door

Een opmerking toevoegen

Voeg je antwoord toe

Lisa zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 60