Model A1288 / 8, 16, or 32 GB capacity

584 Vragen Bekijk alle

Broken Home button Spring?

I have broken off the gold looking spring on the logic board, i bourght a solderer to put it back on and now I have lost the bit? where can I get this it is the gold spring part right next to the lcd connector? thanks

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 0

Commentaar:

Help... The same thing happened to me!!

door

Een opmerking toevoegen
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12

5 Antwoorden

Gekozen oplossing

I believe the diagram for the home button is like this: http://imageshack.us/photo/my-images/215...

In that image when the digitizer is in place 1 and 2 are in contact with each other and 3 and 4 are in contact with each other. The button just completes the final connection.

A wire soldered between 3 and 4 would do the job if you lost your spring.

As for martinkreis:

The spring is soldered. (see my answer here: gold spring for Homebutton connection )

Was dit antwoord nuttig?

Score 1

Commentaar:

Hi,

do you know how this spring is fixed on the logic board?

Is it fixed with a screw or solded?

Which material should I use if I fix it self made?

door

Een opmerking toevoegen

Same here. I've read other forums where people have soldered a hair-thin wire to bridge the connection between the gold spring and the gold home button. All you need to do is bridge the connection. It is not the sensor that determines when the home button is being pressed, just the connector. That's what I understand.

Was dit antwoord nuttig?

Score 0

Commentaar:

I believe the diagram for the home button is like this:

http://imageshack.us/photo/my-images/215...

The button just completes the final connection.

door

Een opmerking toevoegen

where can i get a #2 Spring??

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

Could i just use foil?

Was dit antwoord nuttig?

Score 0

Commentaar:

for replace clip

door

It probably will work but not for long. You need something with a bit of "spring" to it so it keeps constant contact with home button.

door

Een opmerking toevoegen

do you know whats it called and where i can buy it

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

Voeg je antwoord toe

david zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 2

Altijd: 4,914