Repareer je spullen Gemeenschap Winkel

1.6 or 1.8 GHz dual-core processor, 2 GB or 4 GB of SDRAM, 64 GB or 128 GB SSD

192 Vragen Bekijk alle

Opties

Installed new battery, but not charging

I recently installed a new (aftermarket) battery in my MacBook Air 11" after the original battery stopped working.

After replacing the battery status reads Replace Now. Not charging.

After some research I decided to replace the i/o board but unfortunately I get the same result.

Suggestions? Should I assume the new battery is faulty? Or should I try replacing the i/o board cable as well?

Update (09/30/2015)

In addition: I have tried two different MagSafe chargers and also reset the SMC twice.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 1
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

Try a PRAM reset holding alt, cmd and R+P on start up until your hear the chime again. This should enable the macbook to attempt to charge, failing that clean the charger ports well with alcohol using a paintbrush/toothbrush - then try again. This has worked for me in the past. Alternatively you may have a faulty battery - aftermarket ones can occassionally arrive without charge.

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Voeg je antwoord toe

MichaelV74 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 2

Altijd: 313