Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Model A1288 / 8, 16, or 32 GB capacity

591 Vragen Bekijk alle

Why does my screen not work

After turning my ipod on it powers up like normal. When I drag my finger across the screen to unlock it nothing happens. I changed the digitizer screen already. What else could be wrong?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0


What else have you tried already? Have you restored it to factory firmware? Have you looked at the crash logs?


Voeg een opmerking toe

Nintendo Switch-kits

Een snelle oplossing die je weer mee laat doen

Koop Switchkits

Nintendo Switch-kits

Een snelle oplossing die je weer mee laat doen

Koop Switchkits

1 Antwoord

Het nuttigste antwoord

My question " after glass replacement, touch screen doesn't work" was not resolved until today. I've tried two other glass/digitizer replacements and both failed to yield any results. The third one works! Hurray! I spent more for the third one because the ad confirmed the original part # 821-0627-a. I bought three glass replacements from 3 different sellers, thinking that They were defective aftermarket parts. At the same time thinking that I destroyed the ipod by attempting this project. In the many attempts to get the first two to work,including plugging and unplugging, the ribbons acquired a very small tear. It would be tough to get my money back now that the ribbons are torn, even though they didn't work in the first place.

The only thing I did differently between the second and third glass was to plug in the headphones. Don't ask me what made me do that, but if it turns out that's what will affect yours, I need to know.

Hope this helps, I've been obsessed for several weeks with this issue.

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Voeg je antwoord toe

Brandon zal eeuwig dankbaar zijn.

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 1,700