Rep: 23
1
At machine start up the message ""Error 46 clean impossible" appears.
user's guide says it is a generic mechanical problem, but there's nothing wrong inside.
Could be the printing head to be replaced?
Is dit een goede vraag?
Rep: 55
2
I am currently working on this myself. It means your ink absorber pad is full. I purchased a new pad, but now I can't find instructions on how to install it. Apparently, Brother really wants you to have a technician do this, or buy a new printer. I've seen posts that say you can clear the message, but if the absorber pad is full, you could end up with a big mess.
Was dit antwoord nuttig?
Thank you very much Krystal, finally i got it :)
Where did you get the new pad? /Peter
Rep: 432
8
3
1
From what I can tell is find a guide to dissemble your printer.
It might be messy but not shore if it is possible to wash them out and then dry them? (Just an idea as I have never done this before but was wandering it myself when I was cleaning my printhead and if they possibly need replacing anyways could be worth trying)
If it is anything like mine they come in a plastic holder and is full of a felt like material on both sides of the print heads track and also a couple smaller ones under the print head park position.
Don't know if this link is of any help
http://homepage.ntlworld.com/boots44/bro...
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 7
Altijd: 694
1 Opmerking
At least these people don't kid around. What a great fatalistic message! It's to late to work on tonight but I'll research tomorrow. Give us a little bit of time.
door mayer