Opties

Step 7 Remove the two 5.3 mm T6 Torx screws securing etc

i bought the torx from ifixit, but the T6 doesnt fit the screws in this step. Neither do any of the other sizes from the set.

What other torx could this be?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0

1 Opmerking:

Just so we know which screw can you point out which guide you encountered the issue. Most of the guides follow the same layout is this the screw in question: "two 5.3 mm T6 Torx screws securing the data display cable to the logic board."

door

Voeg een opmerking toe