Ga door naar hoofdinhoud

Released alongside the AirPort Extreme base station, this hard drive equipped variant offers 802.11ac speed on a time capsule NAS.

56 Vragen Bekijk alle

Want to know how the Status light wired for Time Capsule A1470

I'd received damaged AirPort Time Capsule A1470. The status light's 3 electrical wires and 3 pin connector were cut. The only "3 wires" are left inside. I wanna know how those wires connected to the logicboard.

Thanks in advance.

Block Image

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Het nuttigste antwoord

They connect to the logic board J1700 connector which is just to the right side of the power supply connector. Here's a good picture of the connectors: Step 4 image from this teardown: AirPort Extreme A1521 Teardown which is it twin without the hard drive.

Was dit antwoord nuttig?

Score 1

1 Opmerking:

On my Airport Extreme, the pin closest to the J1700 lable is common to the status LED, the middle pin is to the yellow and the farthest from the J1700 lable is t the green.

door

Voeg een opmerking toe

Voeg je antwoord toe

Mai Ichijoh zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 8

Altijd: 328