Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Released May 2012, identified by model number J2011-03-US.

48 Vragen Bekijk alle

My charge port came loose, how can I fix this?

I was forewarned about this problem before I bought my Jambox, but I didn't think it would ever happen to me. I was simply trying to charge my Jambox through the charge port, but I might have plugged it in too aggressively because the charge port came loose! It honestly just fell out, and I have absolutely no idea how to fix it.

I'm pretty upset because I just got my Jambox this past year for Christmas and it's already broken! Please help!

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 9
Voeg een opmerking toe

4 Antwoorden

Het nuttigste antwoord

Don’t worry, this is a common problem! Although it does take a little bit of effort to get the charge port back in place, it can be accomplished with the proper equipment and the helpful information offered on the troubleshooting guide offered for the Big Jambox.

Basically, the part will require some soldering and that should pretty much fix your problem. I hope you find the solution!

Was dit antwoord nuttig?

Score 2

Commentaar:

Does anyone have the size / type of the DC barrel connector? My Jambox took a tumble when I lent it out and apparently the DC connector hit first, it popped off the board and the connector itself is in about 6 or 7 pieces...

TIA

door

One more thing - It seems I lost C14 in the fall as well. Anyone know a good replacement Part# for that cap, or can I just get away with bridging it?

door

Voeg een opmerking toe

http://www.digikey.com/product-search/en...

This is a direct replacement barrel connector. You will obviously have to solider it to the board. Just copy and paste in your search box. The part cost less than a couple bucks. Hope this helped

Was dit antwoord nuttig?

Score 0

Commentaar:

Awesome! This is great thanks so much for the link!

door

Voeg een opmerking toe

can you still charge with usb even when the ac charger port is broken? does the circuit board need the power jack port soldered in to function?

(I know usb charges slowly and not fully, shortening battery life before the ac port was broken)

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

My charging port got detached from the board,a repairer repaired it but could work so I want to get a new board, will I get the bored to buy .

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Gabriella Graham zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 10

Afgelopen 30 dagen: 37

Altijd: 16,388