Rep: 301
9
4
After replacing a friend's iPhone screen, I found that I needed to reseat some display cables, but I couldn't get the new display back open. My suction cup would come off before the display would budge. Does anyone know another way?
Is dit een goede vraag?
Rep: 24,4k
35
16
30
At the Headphone Jack corner, just above the Headphone Jack port, the front screen frame has a very thin area which can accommodate a thin pry tool. The tip of a razor blade could be used. Carefully insert the tip down between the iPhone frame and the screen frame about half a mm, and pry up the screen. Be careful not to damage either frame. Look at an old screen to see this area.
Was dit antwoord nuttig?
Thanks! I tried that, and it worked, but the display only moved a tiny bit... Would I put a pick in to hold the display?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 0
Altijd: 74
