Repareer je spullen Gemeenschap Winkel

Model A1297 Unibody: Early 2009, Mid 2009, Mid 2010, Early 2011 & Late 2011

544 Vragen Bekijk alle

Opties

no screen or key board but getting the start up chime

I replaced the hard drive (500 GB 5400 RPM 2.5" Toshiba) that didn't seem to do the trick.

It starts up with a chime and and a light comes on for about 5 sec on the front right outside base. After that the fans run and i can hear and feel the hard drive turning. Other than that nothing. No screen no keyboard lights.

I bought it used and was told it needed a hard drive. When i opened it up the old hard drive was gone.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 1
4 opmerkingen

Please supply us the last four digits of your serial number so we can identify your exact model.

door

DC79

Model no A1297

ser no C02DV1YWDC79

door

I tried the smc reset and lost the keyboard again

door

Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

On the left side you should see a battery tester depress the tester button and see what the it tell's you.

Did you install OS-X on to the HD? If not you'll need to find a friend who has a Mac to create a bootable drive.

In this case I would get a 32 GB or bigger USB thumb drive (or external HD) and have your friend format and install OS-X on it. As you didn't tell us the exact model you have I can't tell you which OS version you'll need (oldest your system will support). You likely can use the newer versions Mavericks (10.9.x) & Yosemite (10.10.x). Make sure your friend tests it to make sure it boots up his system and then copy over to it the OS installer as you'll need it for your system. Use the drive you setup to see if you can get it to boot up your system.

Does the system have memory modules installed? If the drive was pulled I would expect they pulled the RAM too. If not present you'll need put in at least 2GB.

If you got to this point and the system still isn't running lets try doing a SMC reset. Follow this Apple TN: Intel-based Macs: Resetting the System Management Controller (SMC).

Was dit antwoord nuttig?

Ja Nee
Score 2

6 opmerkingen:

DC79 Model no A1297 ser no C02DV1YWDC79

jaypieces, 7 hours ago

MacBook Pro 17" 2.53 GHz Core i5 (Mid-2010)

Dan, 7 hours ago

Ok I downloaded OX Yosemite onto a wd my passport. I pluged it into the computer and started it why'll holding down control R. I now have keyboard lights and was able to eject a cd that was inside of the disc drive. I however still do not have a screen.

I tried the smc reset and lost the keyboard again

The Ram was still in it! I however bought 1 new card but never installed it

door

Ok I downloaded OX Yosemite onto a wd my passport. I pluged it into the computer and started it why'll holding down control R.

I now have keyboard lights and was able to eject a cd that was inside of the disc drive. I however still do not have a screen.

door

With it running use a flashlight to shine light thought the Apple logo on the back of the lid (poor mans backlight). Do you see a faint image of the desktop and the icons on it? If you do then the displays backlight logic needs to be fixed. If not then the logic board maybe bad.

door

i used the flash light when i started the computer. it blacked the light out a couple of times but not seeing anything else

door

Do you have an external monitor that you can plug in? Give that a try.

door

1 commentaar meer tonen

Voeg een opmerking toe

Opties

the hard drive was probably the only thing that was good on it. thake it to a local computer expert

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Voeg je antwoord toe

jaypieces zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 1

Altijd: 142