Ga door naar hoofdinhoud

Model No. A1367 / 8, 16, 32, or 64 GB capacity

948 Vragen Bekijk alle
Vraag afgerond

White Screen only when I plug it in

I replaced a front panel on the iPod and i plugged in to charge and i got the white screen. after a little bit, it turns off and won't turn back on. if i unplug it, the same thing happens. I need some answers quick because i have to give it back to a customer by next week. Any ideas?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

3 Antwoorden

Gekozen oplossing

I hate ipod 4th gen.

Have you tried a reboot home&power to reset? If so, let the battery die, that may work.

Otherwise you've either, knocked a component off when removing the plate, or the lcd connection wasn't In correctly, and the display is blown. So another is required.

Is it recognised bh itunes when plugged into the pc/laptop/mac

Was dit antwoord nuttig?

Score 1

Commentaar:

I'm trying to run its battery down but since i can't do anything with the screen, it's stuck in standby mode. Any ideas on how to get it down faster?

door

Thanks for your input. I ran downs its battery and it was the display.

door

Voeg een opmerking toe

No, I've been in the same situation. Unless you're any good at de sokderig the battery?

Was dit antwoord nuttig?

Score 0

Commentaar:

I'd rather not try that partially because I already managed to short out my first screen replacement trying to open it after it didn't work. So, I'm not sure how to proceed.

door

Voeg een opmerking toe

I am inthe same boat. White screen after repair.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 3

Altijd: 82