Repareer je spullen Gemeenschap Winkel

Repair information, troubleshooting tips, and guides for the sixth iteration of Apple iPhone, announced on September 12, 2012. Model: A1428, A1429

2522 Vragen Bekijk alle

Opties

How to replace/desolder iPhone 5 SIM card reader?

Hello,

My iPhone 5 always seems to say "No SIM" even when inserting several SIM cards and cleaning the tray and internals. I strongly believe this is a SIM card reader fault, hence please may I ask how I would do about de-soldering and soldering on a new SIM card reader on the iPhone 5?

I looked at several resources online and they have given me a general idea since there aren't many guides online, hence could I please ask you guys for more specifics on how-to? I apologise for the bother.

Thank you ever so sincerely! :)

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 8
Voeg een opmerking toe

6 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

Alright, I guess I'm gonna throw my hat into this crisis of misinformation. So, OP, if you don't have a smd work station and experience in soldering, this is not for you. What you should do is look into a GOOD board repair shop that can do this, and if that's worth getting a used iPhone 5. The phone that's next on the list to become extinct. Sounds like a $75 purchase on Craigslist. This particular repair would be difficult, especially because of the plastic components. I do have a technique for this, but still, not easy. Not for a beginner for sure. The only person who made an ounce of sense was that David F guy. The rest are not things that remotely make sense

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe
Het nuttigste antwoord

Opties

It is not an easy task the problem are the 2 solderpads hidden under the sim contact made in a plastic frame

Was dit antwoord nuttig?

Ja Nee
Score 3
Voeg een opmerking toe

Opties

If you have to ask i don't think you will be able to do it, it's not easy to resolder such a tiny component. My bets advice to you is get an old circuit board, I use a RROD Xbox 360 and practice soldering onto it.

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe

Opties

https://www.youtube.com/watch?v=7o6f_zq2...

This video showed it pretty good for me atleast! Hope you all the best!

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Opties

That video didn't show how to do anything. However, I just started looking into this but I imagine you wouldn't actually "solder", you'd use a heat gun. Any time there's multiple solder points, it's usually best to use a heat gun to soften the solder.

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Opties

I suggest to bring the unit to iPhone service center and let them fix it for you.they were more competent than us since it was their kind of job

Was dit antwoord nuttig?

Ja Nee
Score 0

2 opmerkingen:

How much would that cost?

door

They don't microsolder at Apple. They sell you a new phone

door

Voeg een opmerking toe

Voeg je antwoord toe

Arif Ullah zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 5

Altijd: 24,867