Ga door naar hoofdinhoud

Repair information and guides for the fifth generation of iPhone. Model: A1387

2193 Vragen Bekijk alle

Is my power and sensor cable failing?

i ordered a battery and replaced it today in the hope that it would keep my iphone from shutting off and restarting itself. the battery came at 35 percent and stilll could not keep the device from restarting. when it does this it loads past the boot logo to the slide to unlock screen then shuts off and repeats. will a new power and sensor cable resolve this issue? please help

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score -1
Voeg een opmerking toe

1 Antwoord

I wont say yes for sure, but it does sound more to do with your power button assembly then anything... its possible its in a stuck position. its actually VERY common for iphone 4's to have a power button stuck issue... though normally you have to replace the plastic housing the holds in the assembly as well... or I normally do at least. Also clean out the housing and button area for any dirt or crud.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Hiram Acevedo zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 1

Altijd: 26