Repareer je spullen Gemeenschap Winkel

Repair information and guides for the fifth generation of iPhone. Model: A1387

2193 Vragen Bekijk alle

Opties

White screen with lines after touching the Silentbutton cable

Hi there,

I had to change my headphonejack. Everything went fine. I could use my headphones again. After a while the silent switch didn't lock right in place. I opened the back and replaced the cable (just touched it with a repair tool) after that the silent switch worked but the screen showed white with many moving lines.

I had this befor and the only solution was to replace the display.

Why is that? I didn't touch the display or the display cables itself?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score -1
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

I would try disconnecting the battery and then disconnecting and reconnecting the display and digitizer connections to the motherboard. Then reconnect the battery again and power on the phone. Also inspect the digitizer and display cables and check to see if they have any damage and are connected properly to the motherboard. Hope this helps.

Look at step 17 for LCD and digitizer connections: iPhone 4S Screen Replacement

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Voeg je antwoord toe

tarsonis zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 41