Rep: 557
11
3
1
When making a cut the saw blade seems to bounce up and down. It will not make a clean cut through the material. I have tried using different speeds but it is still bouncing
Is dit een goede vraag?
Rep: 116,3k
66
68
359
Wrong blade for material - too big, too large, too dull.
What material are you cutting. How thick is the material, what type of blade are you using, how many teeth per inch. The answer to all those questions contains the solution to your problem.
If this answer is acceptable please remember to return and mark it.
Was dit antwoord nuttig?
Afgelopen 24 uren: 1
Afgelopen 7 dagen: 1
Afgelopen 30 dagen: 5
Altijd: 92
