Ga door naar hoofdinhoud

Repair information, troubleshooting tips, and guides for the sixth iteration of Apple iPhone, announced on September 12, 2012. Model: A1428, A1429

2522 Vragen Bekijk alle

Yellow spot on iPhone screen after screen replacement

Im Running repair store which repairs iPad, iPhones and so on.

After replacing lcd I have noticed that about 10% of the screen has a yellow spot on it. All i do is wait couple of days and spots will disappear.

What causes this issue? Is it some clue or what it is.

Thanks for you reply.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 5
1 Opmerking

And its not about the quality. I 've faced this issue on 5 different suplier lcds

door

Voeg een opmerking toe

4 Antwoorden

Het nuttigste antwoord

Pressure from the backplate don't screw the screws down so tight especially the one beside proximity and home button

update

Isn't there a screw at the top beside the ear piece that holds the frame down

Block Image

Post a picture of the yellow stain and we can diagnose it better

Was dit antwoord nuttig?

Score 4

6 opmerkingen:

Those are pre-assembled so I dont need to do that. I need only loosen three connector cover screws and plug new screen in..

door

Happy days mate glad you got it sorted never would have thought it would have been that.

That's another tip saved in the memory bank lol

door

I am experiencing this issue after replacing my broken screen. Do i need to disassemble the phone again or does it go away after a while?

door

Well whoever pre assembled it screwed them to tight

door

There are only two screws that hold the screen down (the pentalobe at the bottom). How will it affect the pressure on the top half of the screen?

door

1 commentaar meer tonen

Voeg een opmerking toe

Ya it's the screen connector shield that does it. Take it off and reseat it till til goes away. At least that's what causes it on the 5.

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe

These are my findings why yellowish spots on iphone LCD screens appear.

1-Due to some particles/material between Backlight film and metal back plate /sheild.

2-Bent in the Metal plate/Sheild.

3-Tightening the screws too much near home button, or speakers.

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe

This is the bug of wrongdoer that can read all info on display and control the touchscreen on Devices . This technology use the governments structures . See info about TEMPEST attacks

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Henri Rautio zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 6

Afgelopen 30 dagen: 33

Altijd: 26,153