How do I remove the rear case on a Zeepad FlytouchX Tablet?

Question

Tablet

Reparaties voor de meeste tabletcomputers. Vanwege hun kleine formaat en veelvuldig gebruik van lijm is reparatie van tablets iets ingewikkelder dan reparatie van laptops.

18908 Vragen Bekijk alle

Vraag afgerond

Jay Reynolds @jayreynolds

Rep: 11

Gepost: 8 okt. 2013

Opties

How do I remove the rear case on a Zeepad FlytouchX Tablet?

This FlytouchX tablet is the 9.7 inch tablet as seen at this URL = http://www.zeepad.net/flytouch%20X.html

It has two problems:

1. Charge jack needs repaired.

2. The tablet USB connection is not recognized on any of three different notebook PCs. Since USB is faulty I can not update its USB driver.

Any help would be appreciated.

Jay Reynolds

reynoldsj8@outlook.com

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee

Score 0

1 Opmerking

Hi. Thanks but my Flytouch X has no screws. The back is wrapped around the internal boards and seems to be slotted into the glass front. There is no indents or visible spots where a tool can be inserted between the glass and the back. If I put it face up on a pad and press out on the long sides at the edge of the cover it seems to spring open at the mid point. However without being able to do the same at the corners of the case, I am afraid the back will distort. Any ideas?

Jay Reynolds

9 okt. 2013 door Jay Reynolds

Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

mayer @mayer

Rep: 685,3k

MacHale Enterprises

3,4k

1,1k

2,6k

Gepost: 8 okt. 2013

Opties

Here's a video on tearing it down: http://www.youtube.com/watch?v=53lF0XAFY...

Here's how to just take the back off: http://www.androidtablets.net/forum/gome...

Was dit antwoord nuttig?

Ja Nee

Score 1

3 opmerkingen:

Hi. Thanks but my Flytouch X has no screws. The back is wrapped around the internal boards and seems to be slotted into the glass front. There is no indents or visible spots where a tool can be inserted between the glass and the back. If I put it face up on a pad and press out on the long sides at the edge of the cover it seems to spring open at the mid point. However without being able to do the same at the corners of the case, I am afraid the back will distort. Any ideas? Jay Reynolds

Jay Reynolds, 18 seconds ago

9 okt. 2013 door Jay Reynolds

Hi. Thanks but my Flytouch X has no screws. The back is wrapped around the internal boards and seems to be slotted into the glass front. There is no indents or visible spots where a tool can be inserted between the glass and the back. If I put it face up on a pad and press out on the long sides at the edge of the cover it seems to spring open at the mid point. However without being able to do the same at the corners of the case, I am afraid the back will distort. Any ideas? Jay Reynolds Jay Reynolds, 18 seconds ago

10 okt. 2013 door Jay Reynolds

Sorry! An hour of searching netted me nothing on repairing, teardown or battery replacement.

10 okt. 2013 door mayer

Voeg een opmerking toe

Hi. Thanks but my Flytouch X has no screws. The back is wrapped around the internal boards and seems to be slotted into the glass front. There is no indents or visible spots where a tool can be inserted between the glass and the back. If I put it face up on a pad and press out on the long sides at the edge of the cover it seems to spring open at the mid point. However without being able to do the same at the corners of the case, I am afraid the back will distort. Any ideas?

Jay Reynolds — Jay Reynolds
Hi. Thanks but my Flytouch X has no screws. The back is wrapped around the internal boards and seems to be slotted into the glass front. There is no indents or visible spots where a tool can be inserted between the glass and the back. If I put it face up on a pad and press out on the long sides at the edge of the cover it seems to spring open at the mid point. However without being able to do the same at the corners of the case, I am afraid the back will distort. Any ideas? Jay Reynolds

Jay Reynolds, 18 seconds ago — Jay Reynolds
Hi. Thanks but my Flytouch X has no screws. The back is wrapped around the internal boards and seems to be slotted into the glass front. There is no indents or visible spots where a tool can be inserted between the glass and the back. If I put it face up on a pad and press out on the long sides at the edge of the cover it seems to spring open at the mid point. However without being able to do the same at the corners of the case, I am afraid the back will distort. Any ideas? Jay Reynolds Jay Reynolds, 18 seconds ago — Jay Reynolds
Sorry! An hour of searching netted me nothing on repairing, teardown or battery replacement. — mayer