Ga door naar hoofdinhoud

Fix Your Stuff

Right to Repair

Parts & Tools

Wireless router released October 2007, model number is WGR614v9.

15 Vragen Bekijk alle

How can I fix a router that gives signal, but not internet?

My router will give off wireless signal, but it does not give internet access. I've tried restoring to factory settings, but that won't work either. Is there any way to fix this?

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 3


Hi i am also facing wifi Router issue i am using Cisco CVR100W Wireless-N VPN Router as access point.

its connected on LAN Port from my switch I am not using WAN port of this router just because i am using Firewall Devices.

Router issue

1. some its SSID not found in network

2. its connected but not able to download anything

3. when i ping on my local getway its working proper but when i ping on google or WAN Network some its ping coming proper or some its going to break.

i am also change LAN Cable but not resolve.

help me ASAP help must appreciated also send me email on


Voeg een opmerking toe

4 Antwoorden

Gekozen oplossing

Check that is is working via Ethernet. You could be having DNS resolution problems. Depending upon your ISP you have to set your router up with the PPPoE username and password. Or, if you have been issued a static IP address by your provider, (you would need to have requested it), the static IP fields (including network mask and gateway) or clone the Mac (nothing to do with Apple Computers) address of your computer given to you by the provider must also be set in the router.

Once you can confirm connection via Ethernet you can set up your wireless network (seems like you know how to do that part).

If this Answer is helpful please remember to return and mark it Accepted.

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe

netgear router problem can be solved - just reset the router using the reset key or log in the router using or use the ip config and find out the default gateway and log in to the router and reset or update the firmware and for any other help visit netgear and get the latest firmware for router and see if this helps you out

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe

you may have problem, just because of few things,

  • Physical Connection problem
  • internet Connection problem
  • Firmware is outdated.

So these are few reasons, which may stop your netgear to serve the internet. so you need to make sure that your modem is connected from internet port of the router.

once you will connect the modem to the router, i will suggest you to reboot the router and modem and then try to access the internet.

Also, you need to make sure that you are getting internet from your modem. so you need to connect your modem from computer and try to access the internet. if you can't access the internet. i will suggest you to contact to internet service provider and ask them for help.

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe


Try connecting your PC with modem or router with RJ45 patch cable and try using internet to check if it works fine or same slow browsing issue. If you still face the slow browsing issue then the issue can be with your ISP and internet connect but its fine then problem in wireless configuration.

In case if connection is fine then go to your router`s wireless setup and make sure that broadcasting is b/g/n mixed mode, then check what broadcasting channel is selected starting from 1 to 11, in case of extreme start or end make in middle like 6 or 7 and in case of any middle number like 6 to 8 make it either 10 or 3. By changing the broadcasting channel shall hopefully stop any interference with other frequencies.

Good Luck

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

roopnate zal eeuwig dankbaar zijn.

Afgelopen 24 uren: 114

Afgelopen 7 dagen: 620

Afgelopen 30 dagen: 2,408

Altijd: 93,028