Need Help With HP 41C Calculator Repair

Question

HP-41C

First manufactured by HP in 1979.

10 Vragen Bekijk alle

Reid @reid76351

Rep: 35

1

Gepost: 2 apr. 2010

Opties

Need Help With HP 41C Calculator Repair

Does anyone know where I might be able to get an old HP 41C Calculator repaired or where I might find information on repairing it myself. Hewlett Packard quit making these probably 20 or so years ago. I have had this one since somewhere around 1980 and it has worked until about 6 or 7 years ago. Since it quit working I have not been able to locate anyone that repairs them. Any help would be very much appreciated.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee

Score 2

Voeg een opmerking toe

3 Antwoorden

Gekozen oplossing

markus weiher @markusweiher

Rep: 35,1k

140

71

53

Gepost: 2 apr. 2010

Opties

did you look at www.hp41.org and www.hpmuseum.org ?

there are some informations about this device - including repair stuff

Was dit antwoord nuttig?

Ja Nee

Score 3

3 opmerkingen:

Hi markus--not much info at the first site but I think you may have gold on the second. Including the URL. +1 Ralph

http://www.hpmuseum.org/repair.htm

2 apr. 2010 door rj713

hi ralph, i found some nice stuff on the first one

there is a repair section: http://www.hp41.org/LibView.cfm?Command=... and in the library i've seen many hp internals, like service manuals and schematics.

2 apr. 2010 door markus weiher

Hi, OK I see what you are talking about. What stopped me was the login requirement. I don't like to do that unless I'm going to be using the site regularly. Ralph

3 apr. 2010 door rj713

Voeg een opmerking toe

Hi markus--not much info at the first site but I think you may have gold on the second. Including the URL. +1 Ralph

http://www.hpmuseum.org/repair.htm — rj713
hi ralph, i found some nice stuff on the first one

there is a repair section: http://www.hp41.org/LibView.cfm?Command=... and in the library i've seen many hp internals, like service manuals and schematics. — markus weiher
Hi, OK I see what you are talking about. What stopped me was the login requirement. I don't like to do that unless I'm going to be using the site regularly. Ralph — rj713