Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: Andrew Bookholt

Titel:

battery connection plate came off mainboard

Tekst:

Hi all, Im new here and would like some advice.

I have just started fixing ipod touches and selling them on, I have come across a problem, when de-soldering a battery on a 32gb 3rd gen the centre plate came away from the mainboard! I have tried to get a fixing to the remaining thread but that also came away! is there any way of bypassing the centre plate and say soldering the centre battery terminal to a pin on the inside with a fine sleeved wire? it sounds logical unless the mainboard changes the current through resistors???!!!??? would really appreciate any help.

dan

Toestel:

-iPod Touch 2nd Generation
+iPod Touch 3rd Generation

Status:

open

Bewerkt door: Andrew Bookholt

Titel:

battery connection plate came off mainboard

Tekst:

Hi all, Im new here and would like some advice.

I have just started fixing ipod touches and selling them on, I have come across a problem, when de-soldering a battery on a 32gb 3rd gen the centre plate came away from the mainboard! I have tried to get a fixing to the remaining thread but that also came away! is there any way of bypassing the centre plate and say soldering the centre battery terminal to a pin on the inside with a fine sleeved wire? it sounds logical unless the mainboard changes the current through resistors???!!!??? would really appreciate any help.

dan

Toestel:

-Ipod Touch 2nd and 3rd gen battery problem
+iPod Touch 2nd Generation

Status:

open

Origineel bericht door: dan

Titel:

battery connection plate came off mainboard

Tekst:

Hi all, Im new here and would like some advice.

I have just started fixing ipod touches and selling them on, I have come across a problem, when de-soldering a battery on a 32gb 3rd gen the centre plate came away from the mainboard! I have tried to get a fixing to the remaining thread but that also came away! is there any way of bypassing the centre plate and say soldering the centre battery terminal to a pin on the inside with a fine sleeved wire? it sounds logical unless the mainboard changes the current through resistors???!!!??? would really appreciate any help.

dan

Toestel:

Ipod Touch 2nd and 3rd gen battery problem

Status:

open