Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: Hanna ,

Titel:

Doesnt turn on after I disassemblied for cleaning

Tekst:

So i disassembled my lenovo ideapad 330s because i wanted to clean the vent... i could see it was pretty dusty. Thought it went well, but after reassembling it, it wont turn on.. No lights when pushing the on button or anything. No reaction when putting the charging cable in either.
 
Really hope someone can help me to figure out what i did wrong..
 
I basically took everything apart to clean everything, because i thought i might as well while im at it… turns out that was a mistake, should have kept it simple..
 
Didnt use water to clean by the way, just a brush and a tooth pick.
 
Maybe someone can see something wrong in this photo.
 
Thankful for any help
 
[image|1811656image|1811716]
[image|1811656image|1811716]

Apparaat:

Lenovo IdeaPad 330S

Status:

open

Bewerkt door: Hanna ,

Titel:

Doesnt turn on after I disassemblied for cleaning

Tekst:

So i disassembled my lenovo ideapad 330s because i wanted to clean the vent... i could see it was pretty dusty. Thought it went well, but after reassembling it, it wont turn on.. No lights when pushing the on button or anything. No reaction when putting the charging cable in either.

Really hope someone can help me to figure out what i did wrong..

I basically took everything apart to clean everything, because i thought i might as well while im at it… turns out that was a mistake, should have kept it simple..

Didnt use water to clean by the way, just a brush and a tooth pick.

Maybe someone can see something wrong in this photo.

Thankful for any help

[image|1811656]

Apparaat:

Lenovo IdeaPad 330S

Status:

open

Goedgekeurd antwoord:

580487

Bewerkt door: Hanna ,

Titel:

Doesnt turn on after I disassemblied for cleaning

Tekst:

So i disassembled my lenovo ideapad 330s because i wanted to clean the vent... i could see it was pretty dusty. Thought it went well, but after reassembling it, it wont turn on.. No lights when pushing the on button or anything. No reaction when putting the charging cable in either.

Really hope someone can help me to figure out what i did wrong..

I basically took everything apart to clean everything, because i thought i might as well while im at it… turns out that was a mistake, should have kept it simple..

Didnt use water to clean by the way, just a brush and a tooth pick.

Maybe someone can see something wrong in this photo.

Thankful for any help

[image|1811656]

Apparaat:

Lenovo IdeaPad 330S

Status:

open

Goedgekeurd antwoord:

580487

Bewerkt door: Hanna ,

Titel:

Doesnt turn on after I disassemblied for cleaning
Doesnt turn on after I disassemblied for cleaning

Tekst:

So i disassembled my lenovo ideapad 330s because i wanted to clean the vent... i could see it was pretty dusty. Thought it went well, but after reassembling it, it wont turn on.. No lights when pushing the on button or anything. No reaction when putting the charging cable in either.

Really hope someone can help me to figure out what i did wrong..

I basically took everything apart to clean everything, because i thought i might as well while im at it… turns out that was a mistake, should have kept it simple..

Didnt use water to clean by the way, just a brush and a tooth pick.

Maybe someone can see something wrong in this photo.

Thankful for any help

[image|1811656]

Apparaat:

Lenovo IdeaPad 330S

Status:

open

Bewerkt door: Hanna ,

Titel:

Doesnt turn after I disassemblied for cleaning

Tekst:

So i disassembled my lenovo ideapad 330s because i wanted to clean the vent... i could see it was pretty dusty. Thought it went well, but after reassembling it, it wont turn on.. No lights when pushing the on button or anything. No reaction when putting the charging cable in either.
 
Really hope someone can help me to figure out what i did wrong..
 
I basically took everything apart to clean everything, because i thought i might as well while im at it… turns out that was a mistake, should have kept it simple..
 
Didnt use water to clean by the way, just a brush and a tooth pick.
 
Maybe someone can see something wrong in this photo.
 
Thankful for any help
 
[image|1811639image|1811656]
[image|1811639image|1811656]

Apparaat:

Lenovo IdeaPad 330S

Status:

open

Bewerkt door: Hanna ,

Titel:

Doesnt turn after I disassemblied for cleaning

Tekst:

So i disassembled my lenovo ideapad 330s because i wanted to clean the vent... i could see it was pretty dusty. Thought it went well, but after reassembling it, it wont turn on.. No lights when pushing the on button or anything. No reaction when putting the charging cable in either.
 
Really hope someone can help me to figure out what i did wrong..
 
I basically took everything apart to clean everything, because i thought i might as well while im at it… turns out that was a mistake, should have kept it simple..
 
Didnt use water to clean by the way, just a brush and a tooth pick.
 
Maybe someone can see something wrong in this photo.
 
Thankful for any help
 
image|1811642[image|1811639]
image|1811642[image|1811639]

Apparaat:

Lenovo IdeaPad 330S

Status:

open

Origineel bericht door: Hanna ,

Titel:

Doesnt turn after I disassemblied for cleaning

Tekst:

So i disassembled my lenovo ideapad 330s because i wanted to clean the vent... i could see it was pretty dusty. Thought it went well, but after reassembling it, it wont turn on.. No lights when pushing the on button or anything. No reaction when putting the charging cable in either.

Really hope someone can help me to figure out what i did wrong..

I basically took everything apart to clean everything, because i thought i might as well while im at it… turns out that was a mistake, should have kept it simple..

Didnt use water to clean by the way, just a brush and a tooth pick.

Maybe someone can see something wrong in this photo.

Thankful for any help

image|1811642]

Apparaat:

Lenovo IdeaPad 330S

Status:

open