Deze versie is geschreven door: Pbearbear

Titel:

Digitizer won’t respond to touch after being replaced

Tekst:

I repaired an iPad 2 by replacing a digitizer before peeling back the adhesive strips I tested it. The new digitizer it will not respond to touch. I made sure all of my ribbon cables were connected properly and it still won’t respond to touch.

Toestel:

iPad 2 GSM

Status:

open

Goedgekeurd antwoord:

Origineel bericht door: Pbearbear

Titel:

Digitizer won’t respond to touch after being replaced

Tekst:

I repaired an iPad 2 by replacing a digitizer before peeling back the adhesive strips I tested it. The new digitizer it will not respond to touch. I made sure all of my ribbon cables were connected properly and it still won’t respond to touch.

Toestel:

iPad 2 GSM

Status:

open