⟐ Answer edited juli 19, 2023 at 20:40 MST

Het luidsprekersymbool van mijn iPhone 7 is bedekt met een grijze waas en uitgeschakeld. Het leek na een update weer te werken, maar helaas bleek dit slechts tijdelijk. De luidspreker functioneert wel als er geluid uitkomt, maar reageert niet op de input van geluid. Wat kan ik hieraan doen?

⟐ Answer accepted april 28, 2021 at 6:30 MST

Ben zelf ook al even op het internet gaan kijken en het volgende geprobeerd, zonder succes;

- schroefjes losser gedraaid

- kabels gecheckt op scheurtjes (niet het geval, voor zover ik kan zien)

- toestel meerdere keren geprobeerd te hard resetten

Helaas zonder enig verschil, is er misschien iemand die enig idee heeft hoe dit kan? Zou je erg dankbaar zijn als ik het zelf weer kan oplossen. Vind het zonde om voor reparatie te sturen.

Alvast bedankt!

⟐ Commented februari 11, 2021 at 11:13 MST

⟐ Answered augustus 08, 2019 at 8:03 MST

Recent werkt mijn iPhone zijn voorcamera, oorspeaker en proximity sensor niet. Heb een nieuwe kabel gekocht en deze vervangen.

Na vervanging werkte hij nog niet. Ik dacht dus; is deze kabel dan ook stuk? Ik heb de kabel daarom getest in een ander apparaat, op dat apparataat werkte de kabel perfect. Wat kan het probleem zijn?

Groetjes.

⟐ Answer edited januari 24, 2019 at 13:48 MST

The story is I got this from a friend who has no access to it he says it’s fully functioning and wiped it’s just he cannot access it due to lack of proof that he purchased it he heard about me and how I fix old phones and tablets and says if I fix it I can keep it as he already has the 12 so I’m asking here for help

(I added this for information I told apple what I told you they like aways said that it’s unfixable and it’s better off I dump it and get a new one)

Thanks for the help appreciated

⟐ Commented mei 06, 2026 at 6:09 MST

I was simply replacing the battery on it, but eventually it won’t charge. There is certainly no issue with the cable (cause I’ve tried many) or the battery.

What’s interesting though is that when it is turned off and plugged in it turns itself on, like it should, but does not charge. It is also not recognized by the computer.

I have tried to connect the old battery, but it acts in the same way.

One thing that I’m afraid might have cause the problem: when connecting the display I accidentally plugged the battery before the display connector, realized my mistake, unplugged it, plugged the display and then the battery. Turned the phone on. Everything is working except it does not charge when plugged it in.

Will be grateful for any advice or information about the issue!

Michael

⟐ Answered mei 03, 2026 at 9:36 MST

I have iphone 7 (A1660) with (NO service) problem , I tryed use ipcc files but carrier still Not Available, so I update to IOS 12 and now I stuck with activate issue(there is still no service,Even with use different sim cared), it saying Unable to Activate An update is required to activate your iphone. image below

I Noted when I eject the tray of sim cared, my phone do’s not say (No SIM card inserted ).

pleas help me!

Thank you before!!

Ibrahim

⟐ Answered maart 31, 2026 at 22:48 MST

I have a iPhone 7 that's dead. Drawing 0.0 when connecting charger. Connecting to battery it's Stuck at 0.18a after pressing power button.

The board looking like a big rainbow.

Any idea how to continue?

⟐ Answered maart 13, 2026 at 14:04 MST

⟐ Commented maart 13, 2026 at 5:32 MST

⟐ Answered februari 20, 2026 at 4:10 MST

⟐ Answered februari 12, 2026 at 18:17 MST

⟐ Commented januari 18, 2026 at 18:50 MST

⟐ Commented december 31, 2025 at 9:14 MST

The battery swap went well. I followed iFixit’s instruction very closely and cautiously. Three hours later yesterday morning, the phone worked. No screws lost or mis-inserted, no ribbons damaged…all went smooth. The phone worked so I charged the battery to 100% for the 1^st step of recalibration. The health monitor said the battery capacity was where it should be with a new battery.

I then ran down the battery to 0% yesterday afternoon (2^nd recalibration step). Again, all appeared fine and all apps worked. I then plugged the phone back in for the 3^rd recalibration step. At some point, I got (what I think is called the) Black Screen of Death. I then unplugged the phone, hit the Vol down and Side button, and the phone came back on, no problems. Content, I then let it charge all night to 100%.

Awoke this morning and the phone was good. I unplugged it, the battery was still at 100% and it was that way for a good chunk of time. Family was gathering in the living room, so I started Bluetooth for some music. The music worked, so I left to get the dogs out.

I came back after that 1 min absence to find the phone dead. And it is still dead. There is no power, even when plugged into an outlet. No home button works. I can’t get it to work on the iTunes on my computer. It is effectively dead.

After several searches online and through this forum, I reseated the new battery and tried to charge it. I even reseated the old battery and tried to charge it, but no luck. I also reseated all of the internal ribbon cables that I moved for the initial battery replacement. Nothing is working.

Any suggestions for what I might consider next? And thanks!

⟐ Commented december 26, 2025 at 14:46 MST

⟐ Commented december 20, 2025 at 10:45 MST

⟐ Answer accepted december 15, 2025 at 21:32 MST

⟐ Answered december 10, 2025 at 13:28 MST