Ga door naar hoofdinhoud
Repareer je spullen
Recht op reparatie
Lid sinds 14-02-13
Antwoord op "How To get stripped screws of my iPhone?"
Use a small left-handed drill bit... it bites into the head and removes the screw.
Antwoord op "Touch screen partially not responding after replacement."
Getting the ribbon cable pinched under the glass during installation might cut one of the conductors in the ribbon cable. Be sure to carefully route the ribbon cables during installation.
Antwoord op "My phone gets no service after lcd replacement. How do I fixit?"
The cable connecting the speaker module to the logic board was not reconnected OR the screw connecting the cable to the case was not reinstalled. Note this is NOT an answer to the question about the non-working phone, which seems to have been liked.
Antwoord op "iPhone 4 Not Working at all after New Screen Replacement"
Try putting the broken screen back in. If it lights up and works, you got a bad screen.
Reputatie na verloop van tijd