Mijn favoriete handleidingen
Heeft geantwoord op: Home Button "Click" Part ReplacementHey Chris ! Yes it is the Home button Flex. you can find it on ebay if you'd like to replace it https://www.ebay.com/itm/New-Home-Button-Flex-Cable-Replacement-part-for-iPad-Air-1-1st-gen/381013464148?hash=item58b62c1454:g:Z...-Rxs:sc:USPSFirstClass!89123!US!-1
Heeft geantwoord op: Are the iPhone 6s battery replacement originalNo, apple does not sell replacement batteries, so anybody saying they are original batteries is lying. There are high quality aftermarket or used original batteries available however. I recommend going straight to apple and taking advantage of their battery replacement program. I believe its only $29
Heeft geantwoord op: iPhone 5S stuck in bootloop with occasional red screenAll this does points to either a faulty battery or board issue. Hopefully just the battery, but these boards are failing at an alarming rate for the iphone 5s due to it's age. Especially after a drop. I would have a shop plug in a new battery just to test. Should be free to diagnose if they're one of the honest ones, or a small fee from the major brands. If that doesn't help, you likely have a cracked solder ball caused from the drop that's making the phone act up.
Heeft geantwoord op: iPhone loops apple logo after battery replacementSounds like either a bad battery, or damage from the disassembly. Hopefully just a bad battery! Quickest way to test is to install the old battery and see how it responds. If it boots up fine, bad battery, if it reacts the same, it is either the new faulty battery or board damage.
Heeft geantwoord op: Phone dropped in water, won't turn on.Take is straight to a reputable repair shop that can open it, clear out the remaining liquid and prevent further damage. The longer it stays in there, the more damage it will create. Rice will do nothing. Faster it is opened and properly cared for, the better chance you have!
Heeft geantwoord op: new screen cables, digitizer cable and the rest won't plug in. HELPHey David! You shouldn't need to force it. If it's not connecting it could be a couple things: 1) Make sure the screen purchased is the correct LCD. Match up the connectors with the old one, they should look exactly the same. It's easy to confuse the iPhone 6 with the 6S. The parts are not compatible. 2) check to see that there's nothing blocking the connection on both the board and the flex itself. Any physical debris in the connector will make it difficult to attach. 3) double check that you're attaching to the correct connector! They look fairly similar, so use a online guide for reference to be sure you're connecting each flex to the correct connector on the motherboard.
Heeft geantwoord op: Replaced iPhone 6S Plus charging assemblyHello! Chances are the part is faulty. Aftermarket chargeports have a high defect rate, as so many functions are controlled by this flex. I recommend purchasing an original flex off ebay that was pulled from a working iphone. I've never had any issues with a used original part.
Heeft geantwoord op: My phone can't charge when I replace new betteryWill need to dissasemble and make sure everything is connected correctly! Zenphone is a tough repair. Very easy to forget something during reassembly. If everything is attached correctly the problem is likely the replacement battery
Heeft geantwoord op: Why does my touchscreen keep cutting out?If the screen is aftermarket that will likely be the problem . They have a lot of touch issues. I would take it to the repair shop you took it to to have it replaced. Should be some sort of warranty on the repair
Heeft geantwoord op: Only charging time I cane switch on my tabYou're sure its a tab 5? I've never heard of this model. Sounds like its a faulty battery based on your description.
Pagina 1 van 8
Reputatie na verloop van tijd
|Post is positief beoordeeld||40||480|