Can I blow a good logic board when replacing in bad MBP?Can I blow a good replacement logic board by installing it in a MBP with a bad DC In Board or other assembly? I'm trying...
Can I replace the ZIF locking flap for the keyboard ribbon cable?I unevenly applied too much pressure on the cable retaining flap of the ZIF socket and half of it broke off. Can I replace...
Antwoord op "Microphone connector Cables order"Those wires just don't want to stay in their black connector housing! I went to look at the wire order on the MBP I just disassembled--and two of the wires came out of that one as well! So I just looked at the logic board of my other perfectly-working MBP, since I also need to know now. The order is: gray - thicker matte black - thinner shiny black (when viewed with connector attached to the board and all of the ports are to the left of the connector). I'm putting a small tab of black tape on the wires and connector to hold them all in place until they get reinstalled and taped to the logic board. Good luck!