I opened my Jabra Speak 710 for a necessary battery replacement, but I can easily take pictures of anything else if anyone needs them. I tore apart the casing with a vengeance, as the device was inoperable anyway. Turns out most of the time I spent was wasted going in the wrong way, and my initial destructive entry was a dead end; I was reminded the lesson I learned early on laptops “if you feel like you’re using too much force, you probably are and you’re probably doing it wrong”. Tools necessary: (1) torx T6 screwdriver (2) torx T9 screwdriver (3) thin pry tool (optimally, plastic) (4) soldering iron/solder/flux (to replace battery) Time: ~20 minutes Parts: 2x AHB682828HPA 3.8v 530mah 2.1Wh Li-ion batteries (See comments for discussion) Disclaimer: (1) This is not a soldering guide and does not endorse or prepare you for safely desoldering batteries. If you are not already comfortable soldering, please do so under the guidance of an expert. (2) Take replacement battery recommendations at your own risk,...