If you want to avoid removing batteries or skip Steps 24-34, then don’t replace the track pad ribbon. Use the existing ribbon assuming it still works (they usually do). It is impossible to thread the track pad ribbon though the very narrow gap between the batteries and the casing. If you want to use a new ribbon, you only need to remove the batteries on one side so you can have access the space where the ribbon goes into the main board. I didn’t use any chemicals for the glue under the battery. Pry the batteries with a flat head screw driver. If you do it with care, you won’t damage the batteries.
Reputatie na verloop van tijd
Het lijkt erop dat deze gebruiker nog geen reputatie heeft verworven.
Zodra ze een reputatiescore hebben bent je in staat om een grafiek te zien van het verloop hiervan.
Hier is een voorbeeld van hoe de grafiek eruitziet:
If you want to avoid removing batteries or skip Steps 24-34, then don’t replace the track pad ribbon. Use the existing ribbon assuming it still works (they usually do). It is impossible to thread the track pad ribbon though the very narrow gap between the batteries and the casing. If you want to use a new ribbon, you only need to remove the batteries on one side so you can have access the space where the ribbon goes into the main board. I didn’t use any chemicals for the glue under the battery. Pry the batteries with a flat head screw driver. If you do it with care, you won’t damage the batteries.