On mine, the black wire plugs into a connector with a locking mechanism controlled by a white strip on the side closest to the middle of the chasis. Flip the white section up to release before pulling on the “wire” (ribbon cable). Flip down to lock.
Be careful as you get near to the end of this. I was pulling it away and the last section came away suddenly, snapping the connection to the body. Read the comments after the next step BEFORE you begin it. The battery is attached to the case in different ways which can complicate things. It also seems to be advisable to isolate the battery from the motherboard using a piece of paper or equiv. before removing.
The fan connector on mine was held in place by a white clamp on the side closest to the middle of the chassis. The long edge toward the middle flips up to vertical. That frees up the fan connector. Likewise for the black “wire” connector right beside it.
Mine had metal casings over both connectors (see next step).
Zodra ze een reputatiescore hebben bent je in staat om een grafiek te zien van het verloop hiervan.
Hier is een voorbeeld van hoe de grafiek eruitziet:
Nog geen reputatiescore gekregen.