I used guitar picks and wedged them in, and spread them around and slowly peeled it up. It was a very long process. Eventually was able to peel the back off with my fingers, but again took a long time.
Also, be careful where the cords for the volume and power buttons are so you don’t damage that cable.
Screws are definitely T4. Like others said. Either that or the manufacturer had variance for which they used on the production line. T3 head did NOT work and was stripping the screws. T4 head worked perfectly.
I’ve never had problems with this torx set in fitting, so it’s either variance in what the manufacturer uses in these phones, or the guide is wrong about what size screws they are.
T4 screws in mine. If you try to use a T3, you’ll strip them. Don’t do that. I had to torque one of the corner screws out, along with its socket, because I started with the T3 head before moving to the T4 head. Mucked the !&&* out of that corner of the phone, but it still works.
Otherwise, very good guide.
Zodra ze een reputatiescore hebben bent je in staat om een grafiek te zien van het verloop hiervan.
Hier is een voorbeeld van hoe de grafiek eruitziet:
Nog geen reputatiescore gekregen.