Antwoord op "Computer Won’t Turn on After Using Wrong Charger"Apple builds in very good over current protection, so the logic board should be fine, but the port and / or charge controller is likely burnt out. Luckily, the Magsafe connector is a separate PCB, and is an easy replacement with this guide ( MacBook Pro 13" Retina Display Mid 2014 MagSafe DC-In Board Replacement ) and a few tools. The battery will likely not be affected as the over current protection protecrs anything past the Magsafe connector PCB. Hope this helps!
Antwoord op "windows vista on raspberry pi 3 B+"You could use virtualisation to create a virtual X86 environment to run windows vista in. Although I wouldn’t recommend anything new than vista as the Pi doesn’t have much processing power, compared to pcs that ran it decently. It might work on the new Pi4 though, so maybe give that a go