mirko

Hi guys I just got an iphone 4 mainboard, with a broken off FPC connector...(image attached) I was told, that it is not...

Hi have an iphone 4 where I recently changed the mainboard. After reassambling everthing, my call partner told me, that...

hi a couple days ago, I changed the powerbutton of a friends phone. Given that I had not much time, I just took another...

hi given that I have an iphone 4s display and and iphone 4 with broken display I wanted to ask...what the difference is...

Hi Have an Iphone 4 16GB which is and was neverlocked. The phone has some issues with reading the Simcard.. For example:...

does a macbook pro a1278 mid 2009 mainboard (2,26 Ghz Version) fit into a 2,53 Ghz mid 2009 case and vice versa?? or are...

Hi have a macbook pro 1278 mid 2009 which does not boot anymore after a drop (apparently battery is not charging anymore)...

Hi have a macbook pro a1278 ... The device fell on the ground...now it does not boot anymore When I plug the charger, the...

HI as the wifi of my iphone 4 is not working anymore after a waterdamage I wanted to know, how i can reach the wifi chip...

Hi Due to the fact, that I have to change my uppercase of my macbook unibody late 2010(white), I just wanted to know, if...

yes the other system works fine the only thing is: probably the pinout of the 2 macbooks is different... but I have no idea where I can find a schedule to check that ...

or ist the pinout of this two macbooks different???

are you sure about that..!?? As I said I checked mAh, Wh as well as volt both batteries had the same values on both batteries is written: -->10,95V ---- 60 W/h

You can bypass the power-on pads http://www.insidemylaptop.com/turn-on-macbook-pro-laptop-without-power-button-locating-power-on-pads/ 1) check which macbook you have (DON'T SHORT-CIRCUIT THE WRONG THING--> BE VERY CAREFUL) 2) if the macbook turnes on, it's a good sign, that the logicboard is still working

Hi, Have same issues with my A1297 MacBook Early 2009 MacBook Pro 2,66 GHz After changing the uppercase my backlight does not work properly! I noticed, that covering the sensor near the camera turns the keyboard backlight on, BUT I CAN'T CHANGE THE BRIGHTNESS (NO F5 AND F6 BUTTON WORKING!) Cable was checked and is connected. Does anybody have any suggestion, where the problem could be? When i push the button, it's greyed with a prohibitory sign... Any idea? Thanks in advance! == Update == Problem solved: Covering the light sensor next to the camera --> f5 f6 work (dark) if it's bright outside --> f5 f6 are disabled Thank You anyways

ohh this picture ist awesome...thank you very much