Joe

Handleidingen waar ik aan meegewerkt heb

Heeft geantwoord op: Orientation of on/off switch, button and cable 22-02-12
I just replaced the back and digitizer to an ipad 2, here is the best picture I took of the ribbon. Hope this helps (if it isnt too late!)
Heeft geantwoord op: Where can you find only the digitizer flex cable? 22-02-12
Impossible to do, you must buy a new digitizer.
Heeft geantwoord op: Does IPad 2 front panel assembly include home button? 22-02-12
Thats kinda steep, 149. You can find the same part on ebay for 75 with adhesive, button, camera holder included. I just completely rebuilt an ipad 2, I buy my parts from this company called usmobileparts out of california. Never had any problems with the products. Also, it would be a good idea to buy the plastic bezel and replace this also, it is only a $6-10 part and will make your life a whole lot easier. Cant access ebay from work but just search the seller usmobileparts

iPhone 4 Verizon Battery Replacement 26-01-12

It is much easier to slightly WARM the battery with a HAIRDRYER not a HEAT GUN to soften the adhesive. DO NOT GET BATTERY HOT AND DO NOT USE HEAT GUN
iPhone 4 Verizon Logic Board Replacement 26-01-12

This is correct, and if you look closely the rubber piece has a "thick" and "thin" side. The "thin" side should be facing "up" on logic board (towards back cover) while the "thick" is pointed "down" (towards screen)