Have Hamilton Beach 2 slice toaster. Handle wouldn't stay down but the elements worked if you held the handle down. Unplug toaster. Remove 4 screws in the toaster feet, pry 4 retainers on sides and ends apart, working around toaster doing a side,an end,other side then other end. Partially lift the works from case. Handle can now be removed. To do this lift the works enough to expose the retainer on the handle. Using a small knife the retainer was pried from the little knob on the plastic post that holds the handle while pulling the handle off. Crumbs were carefully removed from the handle spring using the tip of a small knife. A large accumulation of crumbs were noticed at both ends of the spring. Put the toaster back together by first pushing the works into the case. The retainers on the sides and ends should snap into place with no problem. Then put the 4 screws back in the feet of the toaster. Hopefully your problem was similar to mine, an accumulation of crumbs and your toaster will be working.
Zodra ze een reputatiescore hebben bent je in staat om een grafiek te zien van het verloop hiervan.
Hier is een voorbeeld van hoe de grafiek eruitziet:
Nog geen reputatiescore gekregen.