iPhone 6 Charger not compatible with 5S replacement charge port?I just replaced the charge port on a customers 5S, all went well and the phone charged lovely. A few minutes after...
Antwoord op "Glue is losing grip after LCD repair"I run a small repair business and have also had problems with Z3 (and occasionally Z3 compact) coming unstuck. I think I may have now cracked it :) I first clear all old adhesive, clean both the frame and the new screen with 99.9% isopropanol and microfibre cloth, I allow to dry then apply TWO layers of the best quality 'original' adhesive cutout I can find to purchase. I add a small amount of silicone glue to the top and bottom of frame and secure the screen in place. I apply a small amount of heat and use little plastic clamps for a couple of hours on top and bottom of screen. This seems to have turned the nightmare of Z3 into a minor headache :)
Antwoord op "No touch after Nokia Lumia 535 digitiser replacement"I have come across the same problem myself today. I replaced a complete Nokia 535 LCD digitiser assembly last month without a hitch. Today I have attempted the same repair and although everything looks great -the touch is unresponsive. Doing a bit of research - when replacing just the digitiser (perhaps sometimes the whole diaplay as I am experiencing today) you may/will be required to download NOKIA CARE SUITE 5.0 and DEAD FLASH the device for the touch screen to function. Will let you know how I get on...