820-2532 suspected dead MCP820-2532 no water damage, excellent physical condition PPBUS_G3H - present PP3V42_G3H - present PP3V3_S5 - present PP5V_S3...
820-2330 main rails voltages nighmareI got stuck with a board 820-2330 no water damage, no visual damaged components, excellent physical condition. Did not...
Antwoord op "Location of SMC on logic board"If you think the fault is the SMC chip, you can try to re-flow first and see if that would work. Put 2-3 drops of Kester 186 between logic board and SMC chip. Pre-heat the board to 110-120C and gradually heat the SMC chip to 245C. Use thermocouple on top of chip to measure the temp. Put a desktop computer screw on top of thermocouple to avoid being hit directly by the heat. If you have a digital USB microscope you can watch when the solder balls will melt