Ga door naar hoofdinhoud

Wat je nodig hebt

Video overzicht

Deze demontage is geen reparatiehandleiding. Om je iPhone 6 te repareren, gebruik onze reparatiehandleidingen.

  1. Demontage van de iPhone 6, Demontage van de iPhone 6: stap 1, afbeelding 1 van 2 Demontage van de iPhone 6, Demontage van de iPhone 6: stap 1, afbeelding 2 van 2
    • Het is iPhone 6 tijd! Laten we eens wat technische specificaties uitlichten:

    • Apple A8 processor met 64-bit architectuur

    • M8 tweede generatie bewegingscoprocessor

    • 16, 64, of 128 GB onboard opslagcapaciteit

    • 4.7-inch 1334x750 pixels (326 ppi) Retina HD display

    • 8 MP iSight-camera (met 1.5μ pixels, fasedetectie-autofocus en optische beeldstabilisatie) en een 1.2 MP FaceTime-camera

    • Homeknop met Touch ID vingerafdruksensor, barometer, 3-assige gyro- en accelerometer, omgevingslichtsensor

    • 802.11a/b/g/n/ac Wi‑Fi + Bluetooth 4.0 + NFC + 20-band LTE

    1200万像素的FaceTime的前置摄像头?

    yangle - Antwoord

  2. Demontage van de iPhone 6: stap 2, afbeelding 1 van 3 Demontage van de iPhone 6: stap 2, afbeelding 2 van 3 Demontage van de iPhone 6: stap 2, afbeelding 3 van 3
    • We hebben lang genoeg staan wachten om de nieuwe iPhone 6 met afgeronde hoeken in onze handen te krijgen, we zijn dus maar al te blij om hem volledig uit elkaar te halen!

    • We bedanken onze goede vrienden bij MacFixit Australië voor het gebruik van hun kantoor voor de demontage. Ze hebben een voorraad Mac en iPhone upgrades / accessoires, alsook onze iFixit toolkits. Bedankt Macfixit!

  3. Demontage van de iPhone 6: stap 3, afbeelding 1 van 2 Demontage van de iPhone 6: stap 3, afbeelding 2 van 2
    • Apple heeft besloten om de iPhone 6 als Model A1586 door het leven te laten gaan.

    • De "bult" zoals die algemeen bekend is, is prominent zichtbaar langs de bovenkant van de iPhone 6. Dit is te wijten aan het feit dat Apple niet in staat is om de dikte van de camerasensor met de rest van het toestel gelijk te laten lopen.

    • Hoe groot is die "bult" vraag je? Onze schuifmaat zegt ongeveer 0,6 mm.

    • Dit keer win je, optica.

    How will be unlock sim in Bangladesh ?

    Md.Ibrahim - Antwoord

  4. Demontage van de iPhone 6: stap 4, afbeelding 1 van 2 Demontage van de iPhone 6: stap 4, afbeelding 2 van 2
    • Het afgeronde-hoek-ontwerp van de iPhone 6 doet sterk denken aan de eerste generatie iPhones, zonder de Lightning-connector en Pentalobe schroeven.

    • Met onze 64 Bit Driver Kit, gaan we aan de slag om de Pentalobe schroeven te verwijderen van de iPhone 6.

    • Het is welbekend dat we een hekel hebben aan bedrijfseigen schroeven, maar we zijn al blij dat we deze iPhone niet zullen moeten verwarmen om hem open te kraken.

  5. Demontage van de iPhone 6: stap 5, afbeelding 1 van 2 Demontage van de iPhone 6: stap 5, afbeelding 2 van 2
    Gereedschap gebruikt in deze stap:
    iSclack
    $24.99
    Koop
    • Wie hebben we daar? Niemand minder dan de iSlack! Telefoons open maken op deze manier is zo bevredigend.

    • Wij vertrouwen de iSclack genoeg om met onze nieuwe, glimmende iPhone in de lucht te zwaaien, maar als je dit thuis probeert is het waarschijnlijk best dat je toch maar je twee handen gebruikt voor de veiligheid!

    • Nu het voorpaneel open is nemen we een kijkje binnen in de iPhone 6.

    Удалите следующие винты с головкой Phillips, которые крепят  кронштейн батареи:

    Один винт длиной 2.3 mm., (обозначен красным)

    Один винт длиной 3.1 mm., (обозначен оранжевым)

    Дмитрий Ирашин - Antwoord

  6. Demontage van de iPhone 6: stap 6, afbeelding 1 van 1
    • Deze stap kan het oneigenlijk gebruik van een boemerang met zich mee brengen, dit werd uitgevoerd door professionals of onder toezicht van professionals. Bijgevolg staat iFixit erop dat niemand een poging onderneemt om gelijk welke boemerang-gerelateerde reparaties die uitgevoerd werden tijdens deze demontage na te doen.

    • Dit is hoe je een boemerang gebruikt, toch? We spraken met een aantal Australiërs, en zij kwamen allen tot dezelfde conclusie. Dit is hoe je een boemerang gebruikt.

    What exactly is the boomerang supposed to do, or is that a joke?

    Zack Kilgore - Antwoord

    Dude! Nothing's a joke. As apple uses special screwdrivers for their special screws, they use boomerang to completely detach the front panel assembly from the main unit. I tell you that was very difficult to figure out. But ifixit did it! _/\_

    Tarang Goyal -

    What a 'lame' joke! And such nerds!

    Sam Giler - Antwoord

    HAHAHAHHAHAHAHA accurate

    Rexford Dorchester -

    Looking at the "airfoil" on that boomerang it's either a) left handed or b) a piece of junk. Considering the obtuse angle of it's wings, I'd say opening iPhones is it's only useful purpose.

    spatlese44 - Antwoord

    'I bought myself a new boomerang, but had no space in my back yard to use it'

    Kts - Antwoord

    Hi

    My iPhone 6, subiltely, has lost cellular signal. I've changed the complete lighthening connector with , two times. But still no signal.

    Someone could help me, I don't see what could it be ??

    Mon iPhone 6 a subitement perdu le signal réseau. J'ai changé la nappe complète avec le connecteur ligthtening, deux fois, mais sans résultat.

    Quelqu'un pourrait-il m'aider, je ne vois pas d'où peut venir le problème, une autre piste ?

    Merci, thanks

    guillaume - Antwoord

    Had a right good larf at this loool

    Delboy1st - Antwoord

    Удалите следующие пять винтов с головкой Phillips, которые крепят кронштейн шлейфа блока передней панели:

    Три винта длиной 1.2 mm., (обозначены красным)

    Один винт длиной 1.5 mm., (обозначен оранжевым)

    Один винт длиной 2.9 mm., (обозначен желтым)

    Дмитрий Ирашин - Antwoord

    Bruh you didn't mention earlier that I need boomerang to teardown my phone. Nonetheless I have a boomer is that count?

    Miruxa - Antwoord

  7. Demontage van de iPhone 6: stap 7, afbeelding 1 van 2 Demontage van de iPhone 6: stap 7, afbeelding 2 van 2
    • Hoewel er geen enkele Phillips schroef aan de buitenkant van de telefoon te zien is, zijn er zeker Phillips schroeven aan de binnenkant. Gelukkig kan onze Pro Tech schroevendraaierset elk type schroef aan die deze telefoon te voorschijn tovert.

    • Met onze schroevendraaier in de hand pakken we de metalen schroeven aan waarmee het frontpaneel vastzit.

    Obligatory product placement eyeroll

    Toni Jo - Antwoord

    I understand you're trying to sell things, and that's ok, but it would be nice to explain how to open the phone without a specific $25 tool. I used to think of ifixit as the authority on repairs, but now I have to go elsewhere to figure out how to repair things without these specific tools.

    First Last - Antwoord

    Have you looked for guides on here? This was a teardown, not a guide, if you want instructions look for that. Not meaning to be rude at all

    Blake Williamson -

  8. Demontage van de iPhone 6: stap 8, afbeelding 1 van 2 Demontage van de iPhone 6: stap 8, afbeelding 2 van 2
    • We halen de homeknop gemakkelijk uit het frontpaneel. Maar zoals altijd, is de omliggende rubberen afdichting gemakkelijk te scheuren als je niet beschikt over de vaste hand van een technologie-chirurg.

  9. Demontage van de iPhone 6: stap 9, afbeelding 1 van 2 Demontage van de iPhone 6: stap 9, afbeelding 2 van 2
    • Net zoals bij de iPhone 6 Plus, bevinden de voorwaarts gerichte camera en de microfoonluidspreker op het frontpaneel.

    • We plukken ze eruit en leggen ze klaar voor inspectie.

    Any idea of why my FaceTime camera lens keeps moving to the left? I have replace my iPhone 6 once already.

    https://discussions.apple.com/thread/657...

    joshhyde - Antwoord

    +1 for this. Weird crescent moon effect really stands out in black iPhone 6

    Richard - Antwoord

  10. Demontage van de iPhone 6: stap 10, afbeelding 1 van 2 Demontage van de iPhone 6: stap 10, afbeelding 2 van 2
    • Tot nu toe, is de totale constructie van deze "kleine" iPhone 6 is een exacte kopie van zijn grote broer, de 6 Plus.

    • Deze metalen plaat en het frontpaneel zijn perfecte voorbeelden. Het ontwerp weerspiegelt dat van de iPhone 6 Plus, in dit geval is dat een duidelijke verbetering.

  11. Demontage van de iPhone 6: stap 11, afbeelding 1 van 2 Demontage van de iPhone 6: stap 11, afbeelding 2 van 2
    • We houden van deze batterij treklipjes. Als u ze op de juiste manier trekt, zullen ze u de moeite (en het potentieel gevaar) besparen dat gepaard gaat met het eruit wrikken van de batterij met onaangepast gereedschap.

    • Deze kleefstof is vergelijkbaar met 3M commandlijm, als je op de juiste manier aan het lipje trekt, komt het hele strookje eraf.

  12. Demontage van de iPhone 6: stap 12, afbeelding 1 van 2 Demontage van de iPhone 6: stap 12, afbeelding 2 van 2
    • De iPhone 6 is voorzien van een 1810 mAh, 3,82 V Lithium-ion polymeer batterij met een energierating van 6,91 Wh. Als we de batterij omdraaien, verbetert de rating tot 7,01 Wh! Misschien waren de ingenieurs in staat om er een extra 0,1 Whr in de batterij te proppen na de tekst op de voorzijde te hebben geprint.

    • Apple verkondigt dat deze 28-gram power pack u tot 14 uur lang zal laten praten op 3G en de stand-by tijd zou 250 uur zijn.

    • Dit is wat minder dan de iPhone 6 Plus 11.1 Wh, 2915 mAh batterij, maar nog steeds een opvallende meer dan de 1560 mAh batterij in de iPhone 5s.

    • Het lijkt alsof deze batterij een identiteitscrisis heeft. Aan de voorzijde zijn markeringen van Apple Zuid-Azië (Thailand) Limited en Apple Japan. Op de achterkant staat dat de batterij eigenlijk in Huizhou, China gemaakt is.

    How does the 28-gram weight compare with previous versions ? And to the iP6 Plus density ?

    64.6 mA per gram is better than competing battery solutions from LG and Samsung ?

    Joao Fabio Tavares - Antwoord

    Probably the 6.91 Wh is the design capacity and the 7.01 Wh is a measured value

    cabo - Antwoord

    I don't see an identity crisis for this battery, the Thailand and Japan text are next to mandatory regulatory marks for batteries in those countries (circled diamond logo and circled PSE logo). Between them is a UL recognised component mark (c reversed UR US mark). Presumable it is less trouble for Apple to apply for them through local subsidiaries.

    Bryn Jones - Antwoord

  13. Demontage van de iPhone 6: stap 13, afbeelding 1 van 2 Demontage van de iPhone 6: stap 13, afbeelding 2 van 2
    • Goed nieuws, iedereen! De naar achteren gerichte camera is eenvoudig te verwijderen met een pincet.

    • Hoewel hij niet de mooie optische beeldstabilisatie van de camera in de iPhone 6 Plus bezit, zijn vrijwel alle andere specs wel in dit apparaat aanwezig: 8 megapixels, f / 2,2 diafragma, True Tone flash, en fasedetectie-autofocus.

    • Onze camera beschikt ook over elektronische beeldstabilisatie, een principe dat de effecten van de OIS (optische beeldstabilisatie) met behulp van beeldverwerkingstechnieken probeert na te bootsen.

    Hope you breakout the calipers and measure the thickness of the rear camera between the 6 & 6 Plus.

    Rette - Antwoord

    +1 for this -----

    3gfisch -

    That's also the first thing I was thinking about. How cool would it be if you can drop a 6+ camera module in a 6?

    Johnny -

    So would it actually be possible the swap the camera out for the 6 Plus camera?!? Looks about the same size.

    arockstar - Antwoord

  14. Demontage van de iPhone 6: stap 14, afbeelding 1 van 3 Demontage van de iPhone 6: stap 14, afbeelding 2 van 3 Demontage van de iPhone 6: stap 14, afbeelding 3 van 3
    • We halen de antennes er vliegensvlug uit.

    • Vervolgens komen we aan de printplaat. Hoewel ze er heel elegant uitziet gehuld in haar EMI schilden, willen we zien wat er onder de die mooie verpakking zit.

    I'm curious about the antenna design, how did they fit wifi/bluetooth, GPS, diversity and NFC into the top area?

    Tom Chai - Antwoord

    I too am interested in how the antennas are configured. Especially how they attach to the phone via the plastic connectors ... are these top and bottom sections removable? Would it be possible to swap them out with a different phones to come up with a different color scheme, among other things?

    RDS -

    In the 6+ teardown (step 27) you show it has rubber gaskets around the buttons. Does the 6 include these as well?

    Bryan - Antwoord

    Somewhere in the teardown around this stage, this small piece came out and I don't know where from. Anyone know what this is?? It says, "00095-A" with a small box thing at the end of the character string. Thanks so much in advance!

    (showing both sides)

    [IMG]http://i61.tinypic.com/30augbc.jpg[/IMG]

    [IMG]http://i58.tinypic.com/2lld838.jpg[/IMG]

    [IMG]http://i60.tinypic.com/21k9kld.jpg[/IMG]

    shauhncy - Antwoord

    That looks like the interconnect cable just below and to the right of the rear camera module. You can see it in this step. The teardown is not really meant to be used as instructions; for better results, use one of the many guides for the iPhone 6.

    Jeff Suovanen -

    Anyone know where I can get the Skyworks 77803-20 Mid Band LTE PAD? I need to fix a phone.

    Jason Younger - Antwoord

  15. Demontage van de iPhone 6: stap 15, afbeelding 1 van 2 Demontage van de iPhone 6: stap 15, afbeelding 2 van 2
    • De voorkant van de printplaat:

    • Apple A8 APL1011 SoC + SK Hynix RAM zoals aangegeven door de markeringen H9CKNNN8KTMRWR-NTH (we veronderstellen dat het 1 GB LPDDR3 RAM is, net zoals in de iPhone 6 Plus)

    • Qualcomm MDM9625M LTE Modem

    • Skyworks 77802-23 Low Band LTE PAD

    • Avago A8020 High Band PAD

    • Avago A8010 Ultra High Band PA + FBARs

    • SkyWorks 77803-20

    • InvenSense MP67B 6-assige gyroscoop en accelerometer Combo

    Does anybody know why Skyworks doesn't list any of these chips on their site? (I'm curious to see if they indeed support LTE Band 12, even though it's not officially listed as supported yet.)

    Chris - Antwoord

    If we look on real iPhone 6 or 6 Plus board then we can see near of Gyro is available Accelerometer separated it look like on iPhone 5S, possible combo is used on Prototype board or some Chinese revision but global uses separated ic's of Gyro and Accel.

    Filip Pusca - Antwoord

    how much of logic board ?

    ahmed - Antwoord

    and how i can get ?

    ahmed - Antwoord

    what is e-compass?

    Eagle Jiang - Antwoord

    Can you remove the EMI sheleds and still have the iPhone work after the repair? It seems like one of the connections on the logic board was broken in the removal of the shields.

    Ryan Scott - Antwoord

  16. Demontage van de iPhone 6: stap 16, afbeelding 1 van 1
    • Meer IC's op de voorkant van de printplaat:

    • Qualcomm QFE1000 Envelope Tracking IC

    • RF Micro Devices RF5159 Antenna Switch Module

    • SkyWorks 77356-8 Mid Band PAD

    • Bosch Sensortec BMA280

  17. Demontage van de iPhone 6: stap 17, afbeelding 1 van 1
    • Achterkant van de printplaat:

    • SanDisk SDMFLBCB2 128 Gb (16 GB) NAND Flash

    • Murata 339S0228 Wi-Fi Module

    • Apple/Dialog 338S1251-AZ Power Management IC

    • Broadcom BCM5976 Touchscreen Controller

    • NXP LPC18B1UK ARM Cortex-M3 Microcontroller (ook gekend als de M8 bewegingscoprocessor)

    • NXP 65V10 NFC module + beveiligingselement (bevat hoogstwaarschijnlijk een NXP PN544 NFC controller)

    • Qualcomm WTR1625L RF Transceiver

    There is the Barometer below the SanDisk NAND Flash. Looks like a BMP from Bosch Sensortec

    Joe Ortaniak - Antwoord

    Where is the gray outline i cant see it

    russellschoonmakerjr - Antwoord

  18. Demontage van de iPhone 6: stap 18, afbeelding 1 van 2 Demontage van de iPhone 6: stap 18, afbeelding 2 van 2
    • Er wachten ons nog meer IC's op de achterkant van de printplaat:

    • Qualcomm WFR1620 ontvangst-alleen companion chip. Qualcomm stelt dat de WFR1620 "noodzakelijk is voor de implementatie van de carrier-aggregatie met WTR1625L."

    • Qualcomm PM8019 Power Management IC

    • Texas Instruments 343S0694 Touch Transmitter

    • AMS AS3923 Boosted NFC Tag Front End

    • Wij geloven dat dit gewoon een kleine herziening van de AMS AS3922 is, die "betalingsfunctionaliteiten in ultra-kleine vormfactoren, zoals SIM en μSD" mogelijk maakt.

    • Cirrus Logic 338S1201 audio codec

    • Een grote dank-u-wel aan onze vrienden bij Chipworks om ons te helpen met al deze technologie te identificeren. We zouden dit zeker niet kunnen doen zonder hun!

    In Step 18, can you identify the chip at the far right of the board, sort of diagonally between the holes at the top right corner and bottom? It's the larger and bottom-most of the two chips at that end of the board, directly above the bottom hole. It appears to also be in the 6 Plus at Step 22 at around the same place on its board.

    jon - Antwoord

  19. Demontage van de iPhone 6: stap 19, afbeelding 1 van 2 Demontage van de iPhone 6: stap 19, afbeelding 2 van 2
    • Het verwijderen van het trilmechanisme. Het is nieuw en... verbeterd?

    • Trilmechanismen kiezen lijkt op een keuze zoals tussen Cola en Pepsi. Er is nooit een duidelijk antwoord. Apple blijft het ontwerp van dit deel steeds veranderen:

    • iPhone 4 (contragewicht)

    • iPhone 4S (lineair oscillerende)

    • iPhone 5 / 5s (contragewicht)

    • Op het eerste zicht, denken we dat Apple in deze iPhone een lineair oscillerende ontwerp gebruikt heeft.

  20. Demontage van de iPhone 6: stap 20, afbeelding 1 van 2 Demontage van de iPhone 6: stap 20, afbeelding 2 van 2
    • Het luidspreker gedeelte is dit jaar in een nieuwe vorm gegoten.

    • Omdat markeringen schaars zijn, verwachten we dat dit slechts een kleine update van de iPhone 5s luidspreker is.

    They are using a multi-driver speaker, trying to improve the sounds maybe.

    Tom Chai - Antwoord

    who are the mics and speakers provider? still Knowles or have they changed it? thanks

    Laimo -

    Does anyone know if Knowles is still the supplier of the speakers? Would really appreciate. Thx

    Sam Slant - Antwoord

    Does the thinner speaker make usage improvement on the space?

    Sam - Antwoord

  21. Demontage van de iPhone 6: stap 21, afbeelding 1 van 2 Demontage van de iPhone 6: stap 21, afbeelding 2 van 2
    • Wij verklaren u nu koptelefoonaansluiting en Lightningaansluiting. Twee zijn nu één onderdeel geworden. Beiden zijn op één kabel aangesloten

    • Deze nieuwe eenheid betekent dat je de ene niet kan vervangen zonder de andere. Dit is slecht nieuws als je defecte poorten hebt.

    They were together since the iPhone 5, so what is the point?

    Tom Chai - Antwoord

    can anyone explain the function of the small wire with the gold connection piece on the lightning port piece?

    Varan Cole - Antwoord

    I'd guess grounding - but ground to *what**? The case?

    jimwitte - Antwoord

    This seems to be an antenna coax cable with a miniature coax connector at the end. In the picture, it seems to have been "plugged up" with a small conductive foam piece, I don't see why that is necessary, except for preventing dirt to get in?

    Stephan Fuelling - Antwoord

    Actually nothing is plugged up—the foam lies on the back/top of the connector. Almost every cable connector in the phone has a foam pad on the top to fill the air gap between the connector and whatever lies above it. Helps keep it from jiggling loose while evenly distributing force over the surface of the connector.

    Jeff Suovanen -

  22. Demontage van de iPhone 6: stap 22, afbeelding 1 van 2 Demontage van de iPhone 6: stap 22, afbeelding 2 van 2
    Gereedschap gebruikt in deze stap:
    Tweezers
    $4.99
    Koop
    • Pincetten maken ons leven simpeler. Ze stellen ons in staat delicate kabels, zoals degene die verband houden met de uit- en volume knoppen, met gemak uit elkaar te halen.

    • En zo kunnen we simpelweg de knopjes uit hun iPhone-omhulsel halen.

    • Deze onderdelen lijken erg sterk op degene die we vinden in de iPhone 6 Plus.

    объясните пожалуйста, что за пластинка на которой яблоко, на первом фото. за что она отвечает? она ещё слева и справа прикрыта защитой чёрной.

    l7apoBo3uk WP - Antwoord

  23. Demontage van de iPhone 6: stap 23, afbeelding 1 van 2 Demontage van de iPhone 6: stap 23, afbeelding 2 van 2
    • Dat is alles, beste mensen. De iPhone 6 behaalde een respectabele zeven op tien. Hier is waarom:

    • Er is een voortzetting van de trend van de iPhone 5-serie, het beeldscherm komt als eerste uit de telefoon, wat het schermreparaties een stuk eenvoudiger maakt.

    • De toegang tot de batterij is eenvoudig. Het verwijderen vereist een eigen Pentalobe schroevendraaier en wat kennis van hoe je lijm verwijdert, maar dit is al bij al niet moeilijk.

    • De vingerafdruksensorkabel is omgeleid, dit regelt een significant repareerbaarheid probleem met de iPhone 5s en het maakt de telefoon veel veiliger om te openen. (De kabel van de 5s wordt zeer snel losgerukt als een gebruiker niet voorzichtig is bij het openen van de telefoon).

    • De iPhone maakt nog steeds gebruik van eigen Pentalobe schroeven aan de buitenkant, waarvoor men een speciale schroevendraaier nodig heeft om die te verwijderen.

    • Apple deelt geen reparatie-informatie over de iPhone 6 Plus met onafhankelijke reparateurs of consumenten.

    wait where is the NFC coils?

    dennis97519 - Antwoord

    NFC doesn't need "coils" unless it's a low power device. The iPhone is not low power.

    scottwilkins -

    NFC most certainly needs "coils" or a loop antenna to function. This is because of the load modulation defined in the ISO14443 spec. I suspect the antenna is likely the T308S flex shown in step 17 or perhaps integrated into the case using the screw contacts. It would be simple to verify by Ohm'ing out the antenna pins from the AS3922 and the headers from the T308S flex.

    Richard Grundy -

    re: 4355 Z3X2 - design team name for case.

    4355 - weight is 4.55 oz

    Z3X2 - is a little more interesting, Z3X is an unlocking tool for SAMSUNG phones, and this is the first phone with no SAMSUNG chips in it i.e. Apple is unlocked from Sammy!

    Jay - Antwoord

    Are the plastics bands removable? Do antennas run under them to the outside?

    John - Antwoord

    The antennas are actually metal side bands, the plastic bands are there just to separate the antennas and the main case.

    Tom Chai -

    Where is the barometer?

    r0534322 - Antwoord

    Take a look, here is the pressure sensor

    http://www.techinsights.com/teardown.com...

    Joe Ortaniak -

    I think you should also give credit to the unsung hero.....the screw manufacturer! SFS Group in Switzerland derive more than 10% of their total revenue from Apple and provided around 80 parts in each iPhone 5/5S! Were there more or less screws in the 6?

    Adrian M - Antwoord

    Can anyone tell me where exactly the NFC antenna location is? Tiny in size?

    Andy Yong - Antwoord

    My video has only static. I think the rear-facing microphone is bad. I think it is right next to the rear-facing flash. How does one replace that microphone?

    mdavisak - Antwoord

    i hear a metalic noise when i shake my iphone 6, like a screw that is not fast anymore. recommendations? do I have to unmount everything?

    serena184 - Antwoord

Met dank aan deze vertalers:

en nl

100%

Deze vertalers helpen ons de wereld te repareren! Wil je bijdragen?
Begin met vertalen ›

45 opmerkingen

Did you take square on high res internal images like you did for the iPhone 5? I love having them as my wallpaper backgrounds. Thanks!

Jamie - Antwoord

who makes the screen and the driver chip?

adam - Antwoord

On step 8 you show the home button to have a cable that seems like it connects to the main board .... is this something to take note of when opening it from that bottom edge? Home button in the past contacted to main board with copper springs and not an actual connector

please confirm

Ken - Antwoord

OK, so Cirrus makes the audio codec. What about the other audio chips? Noise cancellation, audio amp, mic preamp?

Miles - Antwoord

Anybody know where the Liquid Contact Indicators (LCI's) are located? I didn't see one inside the SIM card reader as it was on the iPhone 5, 5S.

Abel Pajas - Antwoord

I'm intrigued by the battery improvement and the "identity crisis" with the labelling.

Any chance you could chop one in half to find out if apple is making their own '3D electrode type' batteries using components from multiple countries?

Sebastian - Antwoord

What is the chip iniside Murata WiFi/BT module?

JJ Wu - Antwoord

Wu,

I have checked at the MURATA specs it seems they have Broadcom. May be Apple used them as third party for cost effective customer support. This is WLAN and Bluetooth chipset.

http://wireless.murata.com/eng/products/...

Thanks

Bharat

Bharat Penumutchu -

It is hard to rework a BGA chip, but it will be interesting to see if we can upgrade the memory to 2GB.

ogim - Antwoord

Is it possible to change the camera lens. I think it will gonna break very easy.

Steffen - Antwoord

I disassembled my iphone, and can not understand where this item came from? Any ideas?

https://www.dropbox.com/s/cmqpk8tuz73shy...

Kolius - Antwoord

NFC antenna is on the top of phone ,it is just 10MM2.no ferrite attached and just a FPC .

Joe - Antwoord

Nice, but would be nice to have the antennas torn down also.

Bryce Nesbitt - Antwoord

A low cost Iphone case is available in Amazon. I have been using it for 2years. It is perfectly fit for Iphone 6 plus cover and easy access of all the phone device. This ultra thin flip case specially designed for Apple Iphone 6plus.

http://goo.gl/H9ovIN

bubun123 - Antwoord

Can you make a list of all materials and show if you can put it back together

Aditya Khowal - Antwoord

Ou ce trouve le gps

alexandre - Antwoord

What cools the processor if anything does it have a cooling system

Eli calvillo - Antwoord

что такое ма/ч и вт/ч? эта статья промтом переводилась?

tucherone - Antwoord

The sim is inside but the phone keeps saying no service. I was told it was the antenna. Any ideas on how to fix it?

Sara Reyes - Antwoord

Can you put the guts of and an iPhone 6 into a 6 plus? Or vice versa?

Chris Bubba - Antwoord

I have been successful, so yes. vica n versa.

mB

Mick -

After getting opened the iPhone I noticed that on the side edges of the body is a sticky black rubber, so I ask you, you must also replace this sticker?

valerio - Antwoord

nice teardown... but it would had been nice to know where each screw goes... i had teardown an iphone 6 to change the frame and now all my swcrew are everywhere... was hoping to found where they goes here and boom, nope, a joking teardown... nice

Benjamin Valcourt - Antwoord

We have a complete set of guides for you right here, including screw locations. Teardowns are just meant to be a fun peek at the hardware and overall repairability, and should not be used as guides. For keeping track of your screws I highly recommend a magnetic project mat—it's one of the best tools I own, and I would prefer never to open an iPhone without one.

Jeff Suovanen -

hey guys,

which component contains the LED light for the flash on the rear camera?

Scott Cornez - Antwoord

The power button flex has the flas on it

Zander Law -

plz can u refer how to replace ther rear mic near the camera coz i recording videos without sound! tnx

Mohammad Me - Antwoord

We have a guide for that! The microphone next to the rear facing camera is part of the iPhone 6 Power Button Cable Assembly that you can purchase here. The guide to replace it can be found here. Good luck!

Scott Havard -

Would be nice if you included a photo of the main board with the antenna removed. There is a matching network under the antenna flex cable on the back of the board. If I had an image I could tell if one of the matching components had fallen off of my phone.

gac - Antwoord

хуй пизда залупа пенис хер

а так спасибо большое за этот гаид

vasyarus - Antwoord

вот она - русская культура во всей своей красе. вот без тупости и убогости ну ни как обойтись нельзя было. молодец, гордись собой..

SvS -

а можно ли в заблокироаный айфон 6+ поставить микросхему от айфон 6 рабочий разблокированный ? ну или хотябы основную начинку. конечно есть вопрос как это будет выглядеть на экране разрешение ведь разное . или может по от 6 не сможет использовать тачскрин прошивку и тд. и тп. кто пробовал? подскажите.

Olzhas Bekzhanov - Antwoord

поставить можно но работать не будет)

Андрей Pancir -

What an awesome post! Funny and informative. Well done!

David Kellen - Antwoord

Useless guide, he skipped the step I needed help on.

iffbas - Antwoord

Hi iffbas! This is a teardown not a repair guide, for a full set of step-by-step guides, consult our iPhone 6 manual!

Sam Goldheart -

where is the 00095-A piece?

alex roland - Antwoord

Can you make a list of all materials and show if you can put it back together

王子良 - Antwoord

Where is the magnetometer located?

Chondita Dayton - Antwoord

Right under the battery connector there is what I think to be an antenna can some one tell me what it is

y fr - Antwoord

Seriously… less jokes and more details. What sizes were the Phillips screws? It seems like some were 000 and some were 00. Some were longer than others. It would be nice if we knew where they went.

izraul hidashi - Antwoord

As stated in the banner at the top, this isn’t a guide—but if it’s instructions you need, we have those over here. Phillips driver sizes are not standardized, and vary from one tool manufacturer to the next, so you’ll just have to test carefully and use whichever one fits best. Using iFixit drivers, I usually prefer a PH00 for iPhone screws, but a PH000 works for virtually all of them as well.

Jeff Suovanen -

what is this thing? whatever it is, it was ripped whenever it came with my phone

Brody Dyer - Antwoord

I have a question I didn’t use a magnetic board because I didn’t have one at the time and my screws got disorganized. How can I figure out which one is supposed to go where

Caleb Dueck - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 52

Afgelopen 7 dagen: 325

Afgelopen 30 dagen: 1,387

Altijd: 1,380,569