Deze demontage is aan de gang – Herlaad regelmatig om de laatste wijzigingen te zien!

Gereedschappen die in deze demontage worden gebruikt

Inleiding

This is the teardown for the Apple iMac G3 Model M4984. I don’t think there is much more to say before beginning.

  1. The iMac G3. This was a great computer for the time, and had plenty of features.
    • The iMac G3. This was a great computer for the time, and had plenty of features.

    Voeg opmerking toe

  2. Start by flipping the iMac upside-down. It may help to lay it on a towel, so you don't damage the screen, or scratch the face.
    • Start by flipping the iMac upside-down. It may help to lay it on a towel, so you don't damage the screen, or scratch the face.

    Voeg opmerking toe

    • Remove this Phillips screw.

    • Using a flathead screwdriver, work your way around the bottom cover, until it comes off.

    • Then, lift the bottom cover up and out, and set it aside.

    Voeg opmerking toe

    • Now, remove the DB-15 Video connector from the logic board.

    • It may be helpful to use a Phillips screwdriver to remove the thumbscrews.

    Voeg opmerking toe

  3. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    • Remove the power cable from the logic board assembly.

    Voeg opmerking toe

    • Remove the front panel connector.

    Voeg opmerking toe

    • Now, remove these Phillips screws.

    • Now, grab the logic board assembly by the piece of plastic, and lift it out.

    Voeg opmerking toe

    • The logic board assembly. This is the heart of the computer, it contains the motherboard, CPU, RAM, V-RAM, PRAM battery, the hard drive, and the optical drive.

    Voeg opmerking toe

    • To remove the bottom cover, remove these phillips screws, and pull the bottom cover off the iMac

    Voeg opmerking toe

    • Removing the faceplate:

    • Remove these phillips screws.

    • Now, pivot the faceplate up about 60 degrees and pull it away from the imac, with some wiggleing, it should come free

    Voeg opmerking toe

Chris Green

Lid sinds: 11-10-09

32.635 Reputatie

45 handleidingen geschreven

Team

Master Techs Lid van Master Techs

Community

279 Leden

758 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 14

Afgelopen 30 Dagen: 74

Altijd: 4,946