Ga door naar hoofdinhoud
Bewerken van stap 6 —

Stap type:

Sleep om te herschikken

The IC is a custom (or relabeled) Nintendo chip marked "WCRX-DOL / T2.7488K1". ("Wireless Controller Receiver - Dolphin"). It is presumably a microcontroller that decodes signals from the radio and sends them to the console.

This 4-pin connector goes to the joypad connector on the GameCube.

Desolder these four points to remove the shield and expose the radio on the other side.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.