Palm Tungsten W (i710) Teardown

Terug naar de handleiding

Engels

Nederlands

Vorige stap Volgende stap

Stap 7 vertalen

Stap 7

Palm Tungsten W (i710) Teardown, Starting to take out the main board: stap 0, afbeelding 1 van 3

Palm Tungsten W (i710) Teardown, Starting to take out the main board: stap 0, afbeelding 2 van 3

Palm Tungsten W (i710) Teardown, Starting to take out the main board: stap 0, afbeelding 3 van 3

Starting to take out the main board

To take out the main board, we first need to liberate the side tabs.
Start to pull it from the bottom, but don't pull it completely. Let the upper side still sitting on the device.
Take care on the top, as the antenna is still attached. We will liberate it in the next step.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.